|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
27-05-2013, 09:51 AM
|
#1 | ||
|
Starter Motor
Join Date: May 2013
Posts: 4
|
hi new to your site
the demister for the front screen has no air flow no matter what setting the centre dash controller is set at. does anyone know whats wrong regards greg |
||
|
|
|
27-05-2013, 02:04 PM
|
#2 | ||
|
Regular Member
Join Date: Jul 2012
Posts: 497
|
Sounds like a broken cable.
The cable that controls the shutter to deflect air flow. |
||
|
|
|
|
29-05-2013, 09:56 AM
|
#3 | ||
|
Starter Motor
Join Date: May 2013
Posts: 4
|
hi
the demister fixed on the left hand side behind the glove box is a cam wheel that controls the internal doors for air direction, on mine the demister door lever was out of its pivot arm at the cam wheel end and pivot end after removing air recirculation motor and the loosening the screw on the cam wheel, with the aid of a straighten out coat hanger I managed to get the demister lever re-engaged with the pivot lever and got the cam wheel and the peg on the pivot arm re-engaged and it all works as ford intended regards greg |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
heater demister 2011 fiesta
Linear Mode
