will it fit

[kakoschke]

first time going on this magnificent site. I have an EA speedway car half finished. bought a BF mark2 engine, question is will it fit the EA (clear the front end of the sump). Will a 5 speed 1996 gearbox and flywheel fit to the back of this BF. Am I doing the right thing by running a BF wiring loom with factory ecu to match all standard. Can anyone else tell me if I will encounter any other modification/problems (engine mounts)??
Long live Ford

[GCRXR6]

It depends what division you're running in. Now, things may have changed since I was a scrutineer in the late eighties, or when I read a spec sheet a few months ago, but the engine must match the model for modified production and street stocks. Outlaw classes (not national affiliated) are another mater.

[kakoschke]

dalesford speedway . yes but will it fit ?

[Simple6]

Plenty of people done this change, so have a search (link is under the "Welcome, kakoschke" box).

What I remember though from reading other people's jobs is that there is something to do with the E-series K frame and the B-series sump that means it won't fit without modifying the K-frame or grinding the fins off the B-series sump.

Don't hold me to that, but see how you go with a search.