![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Regular Member
Join Date: Dec 2013
Posts: 104
|
My au falcon has a series 3 ghia dash with all the electricals etc fitted and working correctly but after a number of years all running perfectly the fan has become noisy i cant remember when i installed the dash board but do i have to remove the dash again to change the fan motor ,,, hope not lol thanks cheers steve
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Donating Member
![]() Join Date: Dec 2004
Location: QLD
Posts: 11,815
|
Are they similar to a BA , just drops out the bottom behind glove box ?
|
||
![]() |
![]() ![]() |
![]() |
#3 | |||
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Hervey Bay
Posts: 5,213
|
Quote:
Page 14: http://fordforums.com.au/wsmpub/augx/Part%2016-1.html Might pay remove the glovebox and set the system to recirc so you can see the fan and make sure there are no twigs or leaves rubbing on the fan. Maybe even pull the fan resistor to look into the heater box and make sure there is nothing rubbing on it from that side.. Beware when pulling the fan resistors. Make sure they are fully cool. They get very very hot very quickly and are a danger to fingers if not careful. |
|||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#4 | ||
Regular...with metamusal
![]() Join Date: Oct 2009
Location: Geeeloong
Posts: 6,389
|
you might have leaves/etc stuck in the fan as the AU doesn't have a 'filter' as fitted to the later models. may pay to have a look at it.
|
||
![]() |
![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|