|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-09-2007, 05:55 PM
|
#1 | ||
|
Regular Member
Join Date: Aug 2007
Posts: 70
|
I'm guessing its the same in the sedan...
Interior light has what looks like 2 prongs inside of what looks like holes i'm guessing you need to push the prongs back inside is there a trick to getting them out? |
||
|
|
|
01-09-2007, 06:26 PM
|
#2 | |||
|
Regular Member
Join Date: Sep 2006
Location: wrong side of town
Posts: 174
|
Quote:
cheers george |
|||
|
|
|
|
01-09-2007, 06:49 PM
|
#3 | ||
|
Regular Member
Join Date: Aug 2007
Posts: 70
|
I've got the ute, its got an internal light at the back ...
Interior light not map light |
||
|
|
|
|
01-09-2007, 07:47 PM
|
#4 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
are you trying to remove the bulb? if so, just carefully pull it out of the bits that hold it.
otherwise im not sure what youre trying to ask?
__________________
2024 F150 XLT
|
||
|
|
|
|
01-09-2007, 07:57 PM
|
#5 | ||
|
Regular Member
Join Date: Aug 2007
Posts: 70
|
Remove the light holder so I can pull down the roof lining...
Sorry I guess I didn't make complete sense... Light holder has what seems like prongs in each corner with little bits of metal if you look in that look to be holding on somehow... How the ell do I get them out? |
||
|
|
|
|
01-09-2007, 08:07 PM
|
#6 | |||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
Quote:
the entire unit itself should come off, the clips shouldnt be connected to the roof itself at all.
__________________
2024 F150 XLT
|
|||
|
|
|
|
01-09-2007, 08:11 PM
|
#7 | ||
|
Regular Member
Join Date: Aug 2007
Posts: 70
|
Wtf?
Just pull it down? The clips definitely go into the roof just I guess not knowing if they're clipped in or what don't want to break stuff! This is the interior light assembly at the back in the ute... What about the front assembly / sunglasses holder? seems held on not quite as well as the other but also has 2 bits in the middle that look kinda stuck in there too |
||
|
|
|
|
01-09-2007, 08:13 PM
|
#8 | |||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
Quote:
 :
__________________
2024 F150 XLT
|
|||
|
|
|
|
01-09-2007, 08:24 PM
|
#9 | ||
|
Regular Member
Join Date: Aug 2007
Posts: 70
|
Oh you talking about the clips that hold the roof in? yeah... pull those ones straight out
Its stuck in there pretty well! Why can't people just use screws? |
||
|
|
|
|
01-09-2007, 09:53 PM
|
#10 | ||
|
Regular Member
Join Date: Aug 2007
Posts: 70
|
Alright... for everyone's info they are just clips just gotta lever them a bit harder
|
||
|
|
|
|
01-09-2007, 11:14 PM
|
#11 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2005
Location: Brisbane
Posts: 1,029
|
Just a bit of info on the interior light itself. This interior light is used from EA to BF models, the only difference is the metal clips that are used on the later models(AU-BF).Went to ford to get one for my EB and got one with the clips (EB's have four screws hold them in). Was told that the light is used for replacement of all models. This is for the light only, not the one with the map lights from earlier models(fairmont,XR's ect).
__________________
We salute those brave souls that enter the DARK side |
||
|
|
|
|
02-09-2007, 11:31 AM
|
#12 | ||
|
Regular Member
Join Date: Aug 2007
Posts: 70
|
Ok so some info on the interior of the AU (possibly sedan?) and the interior light
Interior light just needs some leverage but pops straight out Sunglasses holder / map lights is not held onto the roof at all although it is attached to the roof lining! Short of cutting the wires there's no way to get this out other than to unplug the lights from the clips and feed the lights / clip back out through the insulation on the roof lining! ( of a job and you'll need to reattach the insulation somehow later on) |
||
|
|
|
|
03-05-2011, 05:28 PM
|
#13 | ||
|
Starter Motor
Join Date: Apr 2011
Posts: 2
|
Well after reading this I decided to give it a go with my headlining, I have the lining out now. I was also stuck with that interior light and could not work out how to remove, a bit of wedging back and forth got it in the end.
Rubbed and lightly washed the lining and the backboard. What glue are people using to glue it back, local shop suggested spray on contact, which sounds reasonable what's your thoughts? By the way thanks for those that gave the input |
||
|
|
|
|
03-05-2011, 05:57 PM
|
#14 | ||
|
Lost Boost Gained Class
Join Date: Jun 2008
Location: Werribee, Melbourne
Posts: 2,763
|
just pull the light houseing it will come out
 its cliped up there by 4 Srong steel clips SO Just yank a little on it and it will come off
__________________
2006 BF Fairmont Ghia
2001 AU Falcon |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Interior Light
Linear Mode
