Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 05-07-2005, 10:37 PM   #1
mk1_esky
Starter Motor
 
Join Date: Jun 2005
Posts: 1
Default capri oil pump/filter

service my car the other day, chucked on the new filter and it leaked more than the last!, by comparing my escort 1600 to the capri 1600 the capri does not have a flat face for the pump to seal on. it has a inner lip different to the escort. they both have the same part no.

anybody encountered this problem?

the oil pumps are physically different (escort at a right angle, capri angled to clear steering rack) so anybody stumbled accross this problem or has an alternative. the pumps may have been redesigned as mine is an early capri '69

cheers

michael

mk1 escort 2 door
mk1 capri

mk1_esky is offline   Reply With Quote Multi-Quote with this Post
Old 13-08-2005, 12:21 PM   #2
Dale
Starter Motor
 
Join Date: Aug 2005
Posts: 6
Default

Try this web site capri's are all he does www.capriclinic.com
Dale is offline   Reply With Quote Multi-Quote with this Post
Old 12-09-2006, 06:51 AM   #3
caprigt
CAPRIGT
 
caprigt's Avatar
 
Join Date: Aug 2006
Location: Sydney
Posts: 18
Default

Hi Micahel...I,m having exact same problems the Z62 oil filter just doesnt sit right on the oil pump face,I am having big probs ...with O-rings just popping out after revinng engine,I bought an Escort NOS iol pump but the angle of filter housing hits the steering rack n pinion...did you resolve your problem?? Mario
caprigt is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 04:17 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL