Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 09-01-2006, 05:04 AM   #1
niall.b
Guest
 
Posts: n/a
Default Cars with 9" diff

need a bit of info on what models of cars came equipped with the 9" limited slip rear diff. can anyone help?
cheers

  Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 07:28 AM   #2
LTDHO
The one and only
 
LTDHO's Avatar
 
Join Date: Dec 2004
Location: Carrum Downs, Victoria
Posts: 9,053
Default

General rule is any factory fitted 351 pre XD.
I think disk was introduced in XBGT.
__________________
1992 DC LTDHO 360rwkw built by me
Tuned by CVE Performance
Going of the rails on a crazy train
Other cars include Dynamic ED Sprint, Dynamic DL LTD, Sparkling Burgundy DL LTD, Yellow, Red & Blue XB sedan & Black XB Coupe
LTDHO is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 08:12 AM   #3
niall.b
Guest
 
Posts: n/a
Default

cheers, any pics available?
  Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 10:38 AM   #4
rag top
FF.Com.Au Hardcore
 
rag top's Avatar
 
Join Date: Dec 2004
Location: ACT
Posts: 4,028
Default

Are you after pics of the diff or pics of the cars?

Don't forget that a variety of american cars came with the 9 inch diff as well.
__________________
Current Rides:
2000 AU 5L XLS ute; 1970 Mustang project
rag top is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 10:54 AM   #5
Josh_XC
FF.Com.Au Hardcore
 
Join Date: Nov 2005
Location: Canberra
Posts: 1,060
Default

i just put a new 9" diff in my car, XC 351, never looked back its awesome, although u will find urself sideways around conners more often, last night when it was raining, i was going around a conner at 15km/h and even went sideways then, OH THE FUN!!
Josh_XC is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 10:58 AM   #6
BJ
Banned
 
Join Date: Dec 2004
Posts: 4,377
Default

Quote:
Originally Posted by Josh_XC
i just put a new 9" diff in my car, XC 351, never looked back its awesome, although u will find urself sideways around corners more often, last night when it was raining, i was going around a corner at 15km/h and even went sideways then, OH THE FUN!!
I will tell you now Josh it can turn to S*&t very Quickly let me tell you. This was in the dry to. The clutch pack let go and this was the result. My advice is to watch your self.

BJ is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 11:00 AM   #7
red_hotxr6
Banned
 
red_hotxr6's Avatar
 
Join Date: Dec 2005
Location: brisbane
Posts: 2,039
Smile

How not to treat a ford..
red_hotxr6 is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 12:36 PM   #8
ebxr8240
Performance moderator
 
ebxr8240's Avatar
 
Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical advice. 
Default

All 9" in Aussie cars are LSD..Yep pre XD and fitted mainly with 351 engines..It varied though some 2v/ 2 barrel 351's had b/w diff...Disc brakes came out on XC...
__________________
Real cars are not driven by front wheels,real cars lift them!!...
BABYS ARE BOTTLE FED, REAL MEN GET BLOWN.
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
Dart 330ci block turbo black pearl EBXR8 482 rwkw..
Daily driver GTE FG..
Projects http://www.fordforums.com.au/showthread.php?t=107711
http://www.fordforums.com.au/showthr...8+turbo&page=4
ebxr8240 is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 12:56 PM   #9
BJ
Banned
 
Join Date: Dec 2004
Posts: 4,377
Default

Disc brake rears first came out on late model XB's
BJ is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 02:37 PM   #10
4Vman
FF.Com.Au Hardcore
 
4Vman's Avatar
 
Join Date: Jan 2005
Posts: 14,654
Default

Rear Disk brakes came out on Landau's in 72. All XBGTs which first came out in mid 73 had rear disks.
All 351 powered Fords (utes vans sedans limo's etc) had 9" rear's till the end of XC.
If you ordered an LSD in your non 351 powered XW or XY you also got a 9".
XA onwards had LSD BW's for non 351 powered cars.



__________________
335 S/C GT: The new KING of Australian made performance cars..
4Vman is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 03:00 PM   #11
347Stroker
Banned
 
347Stroker's Avatar
 
Join Date: Feb 2005
Posts: 1,750
Default

XA RPO 83 coupe and Landau of 72 all had disc rear.
As said, all XB GT, Landau LTD and 351 Fairlane had Disc LSD 9"
There were open centre 9" cars sold here too, alot of XA XB utes, Fairmonts etc.
347Stroker is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 03:03 PM   #12
4Vman
FF.Com.Au Hardcore
 
4Vman's Avatar
 
Join Date: Jan 2005
Posts: 14,654
Default

Quote:
Originally Posted by 347stroker
XA RPO 83 coupe and Landau of 72 all had disc rear.
As said, all XB GT, Landau LTD and 351 Fairlane had Disc LSD 9"
There were open centre 9" cars sold here too, alot of XA XB utes, Fairmonts etc.
RPO 83's DID NOT have disk rear end, they ALL had drum _2:



__________________
335 S/C GT: The new KING of Australian made performance cars..
4Vman is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 04:46 PM   #13
347Stroker
Banned
 
347Stroker's Avatar
 
Join Date: Feb 2005
Posts: 1,750
Default

Quote:
Originally Posted by 4Vman
RPO 83's DID NOT have disk rear end, they ALL had drum _2:

Check your records good man, they definatly did, and were unable to have enough made in time for bathurst, so they also had them under the bum of the Landau, and argued with CAMS that they were essentially the same vehicle, being 2 door body shells, same 351 engine etc. It worked and the XA Goss ran and won in was disc rear equipped, so was Moffs....
Its the same with the on board jacking on the XA....
Ford were very cunning back when Marsden, Sancitonne and Gibson were throwing the orders...
347Stroker is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 04:47 PM   #14
347Stroker
Banned
 
347Stroker's Avatar
 
Join Date: Feb 2005
Posts: 1,750
Default

I do believe that the 4 doors have drum rears though, but know that alot of the 2 doors definatly had them
347Stroker is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 05:51 PM   #15
rag top
FF.Com.Au Hardcore
 
rag top's Avatar
 
Join Date: Dec 2004
Location: ACT
Posts: 4,028
Default

Funny thing is the author of the thread is located in Bangor, N. Ireland. I don't think all this technical debate on what falcons had what 9 inch diffs really matters, when he asked what cars had 9 inch diffs...
__________________
Current Rides:
2000 AU 5L XLS ute; 1970 Mustang project
rag top is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2006, 05:58 PM   #16
smciner1
Detroit Locker Equiped TM
 
smciner1's Avatar
 
Join Date: Dec 2004
Location: Area 51 (tm)
Posts: 4,928
Default

Quote:
Originally Posted by CH7472
Disc brake rears first came out on late model XB's
All XB GTs, including early 73 ones.
__________________
Apollo Blue 1974 XB Falcon GT, 557 HP
Blue Pearl 2004 BA FPV GT, 290 kW

Quote:
Originally Posted by MRJUCY
Simple give the car a rev & have a listen a Windsor makes a sort of wheezy drone similar to an angry Hugh Grant when a Clevo will sound like Satan has woke up with a hangover & realized he is out of coffee & cigarettes
Falcon GT Club of Geelong.
http://www.facebook.com/FalconGTClubGeelong
smciner1 is offline   Reply With Quote Multi-Quote with this Post
Old 10-01-2006, 04:11 AM   #17
niall.b
Guest
 
Posts: n/a
Default

cheers for the response, if someone could post both a car and a diff pic or two would be interesting. am looking for a straightforward replacement for my cossie that will handle a fair old bit of power too. and ИИИИ out action on the greasy roundabouts
  Reply With Quote Multi-Quote with this Post
Old 10-01-2006, 06:49 AM   #18
4Vman
FF.Com.Au Hardcore
 
4Vman's Avatar
 
Join Date: Jan 2005
Posts: 14,654
Default

Quote:
Originally Posted by 347stroker
Check your records good man, they definatly did, and were unable to have enough made in time for bathurst, so they also had them under the bum of the Landau, and argued with CAMS that they were essentially the same vehicle, being 2 door body shells, same 351 engine etc. It worked and the XA Goss ran and won in was disc rear equipped, so was Moffs....
Its the same with the on board jacking on the XA....
Ford were very cunning back when Marsden, Sancitonne and Gibson were throwing the orders...
Yes Ford Racing did some funny things, especially when it came time to lobby for homologation freedoms, ive got all the CAMS homologation docs for the RPO! but what they did to the race cars is not production car manufacturing!
I can assure you 100% that no RPO left the broady line with rear Disks, a friend did allot of research on this topic for the RPO story in AMC, including build sheet details etc, and he owns a VERY rare RPO coupe (with rear drums), i know of about 30 RPO coupes, all with rear drums too. Your right though about the Landau though, they tried to use the Landau as an excuse to allow the XA to race with disks, which was only done because the RPO didnt have rear disks! : .



__________________
335 S/C GT: The new KING of Australian made performance cars..
4Vman is offline   Reply With Quote Multi-Quote with this Post
Old 10-01-2006, 07:56 AM   #19
OzJavelin
FF.Com.Au Hardcore
 
OzJavelin's Avatar
 
Join Date: Jun 2005
Posts: 3,633
Default

Quote:
Originally Posted by niall.b
cheers for the response, if someone could post both a car and a diff pic or two would be interesting. am looking for a straightforward replacement for my cossie that will handle a fair old bit of power too. and ИИИИ out action on the greasy roundabouts
"Cossie"? Cosworth Serria (spelling?) or something? If so, I'd think ANY 9" you find will need significant reworking to fit. The most narrow is probably from a sixties Stang (expensive) .. maybe a Stang 8" would be better .. or even some hi-po Japanese one? If the car doesn't weight much I doubt it needs a 9", more likely a strengthened stocker or something?

BTW: I've had 9" in a XB GS, XC GXL and 2x F100s. All of them gave be grief .. continuious bearings/seals problems. All the supposedly "weak" other diffs I've had (BWs, AMC20s, Mopar8.75") haven't given me any trouble ..
OzJavelin is offline   Reply With Quote Multi-Quote with this Post
Old 10-01-2006, 08:10 AM   #20
niall.b
Guest
 
Posts: n/a
Default

Thanks Ozjavelin. im trying to get some background info at the moment. i have been told that there is a 9" diff that will slot straight into the Sierra rear beam. A friend of mine in Australia at the moment and given the info & viability, would source one for me and arrange shipping back home. Might all be a waste of time but does no harm to ask
cheers
  Reply With Quote Multi-Quote with this Post
Old 10-01-2006, 08:18 AM   #21
rag top
FF.Com.Au Hardcore
 
rag top's Avatar
 
Join Date: Dec 2004
Location: ACT
Posts: 4,028
Default

Might be worthwhile contacting one of the race teams that used them or a derivative of the 9 inch diff in the sierra RS500.
Maybe contact djr through their website: http://www.djr.com.au

alternatively, get one cut down to suit?
__________________
Current Rides:
2000 AU 5L XLS ute; 1970 Mustang project
rag top is offline   Reply With Quote Multi-Quote with this Post
Old 10-01-2006, 03:42 PM   #22
jcxr
Tribal Elder
 
jcxr's Avatar
 
Join Date: Jul 2005
Location: Yarrambat
Posts: 2,278
Default

Contact Harrop Engineeringin Melbourne
jcxr is offline   Reply With Quote Multi-Quote with this Post
Old 11-01-2006, 12:01 AM   #23
outback_ute
Ute Forum Moderator
Contributing Member
 
outback_ute's Avatar
 
Join Date: Dec 2004
Location: Melb
Posts: 7,227
Default

Dick Johnson was the first person to use the 9" diff centre in the Sierras when they were racing
outback_ute is offline   Reply With Quote Multi-Quote with this Post
Old 11-01-2006, 12:20 AM   #24
Gammaboy
Grinder+Welder = Race car
 
Gammaboy's Avatar
 
Join Date: Jan 2005
Location: Briz-Vegas
Posts: 3,937
Default

Quote:
Originally Posted by outback_ute
Dick Johnson was the first person to use the 9" diff centre in the Sierras when they were racing
Beat me to it.
As the story goes, DJ couldn't keep even the race prepped factory diffs in his Sierra, so he developed and then homologated for Group A racing(no mean feat!) a diff that used 9" internals and bolted up to the factory mounting holes and used the rest of the sierra rear suspension (Although the Aussie Group A cars used alot of Harrop bits).
Finding one would probably be easier for you over in the UK because most of the Euro Group A cars wound up with the DJR designed and developed diffs in them (care of Andy Rouse i believe)
Here's DJ's Shell Sierra.

Piccy thanks to ZC-Cruiser's webby
Bigger version here:
http://www.ftw.com.au/cpg/albums/djr/DCP_0122.jpg


Quote:
Originally Posted by OzJavelin
BTW: I've had 9" in a XB GS, XC GXL and 2x F100s. All of them gave be grief .. continuious bearings/seals problems. All the supposedly "weak" other diffs I've had (BWs, AMC20s, Mopar8.75") haven't given me any trouble ..
Funny, I just couldn't keep a BW in 1 piecce under my car (axles and spiders), however a friend of mine puts 500+hp through a Mopar8.75... he's bent the housing but its still in one piece... 2.75 ratio with a turbo'd Hemi6.
__________________
"No, it will never have enough power until I can spin the wheels at the end of the straightaway in high gear"
- Too much power is never enough....Mark Donohue on the Can Am Porsche 917.
Gammaboy is offline   Reply With Quote Multi-Quote with this Post
Old 11-01-2006, 12:56 AM   #25
Josh_XC
FF.Com.Au Hardcore
 
Join Date: Nov 2005
Location: Canberra
Posts: 1,060
Default

Quote:
Originally Posted by CH7472
I will tell you now Josh it can turn to S*&t very Quickly let me tell you. This was in the dry to. The clutch pack let go and this was the result. My advice is to watch your self.



ahhh dont show me that lol. that even looks like my car an XC... thanxs hahhaa
Josh_XC is offline   Reply With Quote Multi-Quote with this Post
Old 11-01-2006, 01:10 AM   #26
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default

xa gts were detroit lockers i think (correct me if im wrong)
mik is offline   Reply With Quote Multi-Quote with this Post
Old 11-01-2006, 08:17 AM   #27
4Vman
FF.Com.Au Hardcore
 
4Vman's Avatar
 
Join Date: Jan 2005
Posts: 14,654
Default

Quote:
Originally Posted by mik
xa gts were detroit lockers i think (correct me if im wrong)
Ok, Your wrong.. e

Traction lock LSD.



__________________
335 S/C GT: The new KING of Australian made performance cars..
4Vman is offline   Reply With Quote Multi-Quote with this Post
Old 12-01-2006, 09:48 PM   #28
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default

: woops
mik is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 08:55 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL