|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
20-08-2006, 03:36 AM
|
#1 | ||
|
06 SS Thunder Ute
Join Date: Feb 2006
Posts: 115
|
Ey guys,
I jumped on aufalcon.com for this and i found the workshop article but it didnt actually help me. With the AU door trim i removed all the screws hidden behind the caps but it seems to be anchored at the door handle. I look around the door handle and could find where the problem was. Im assuming a hidden screw? Any help would be muchly appreciated. Its an AU1 Fairmont Ghia. Thanks.
__________________
Ford..Holden.. Not fussed lol |
||
|
|
|
20-08-2006, 03:40 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
|
there is the bolts on the bracket in there somewhere from memory.. it doesnt look like its holding the trim on but it is.
if its the front door check under the flip up pockets..(my lane has flip up front armrests) if you can see a bolt/screw it needs to be undone..from my previous experience.
__________________
On The Street Feature Winner Performance Ford Mag See my car at:-www.aufalcon.com/blackers10 |
||
|
|
|
|
20-08-2006, 06:06 AM
|
#3 | ||
|
they call me Tibbo
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
|
there is a 10mm bolt under the door handle cup... there is also a screw under the power window switches
__________________
|
||
|
|
|
|
20-08-2006, 10:04 AM
|
#4 | ||
|
Regular Member
Join Date: Sep 2005
Location: Brisbane
Posts: 258
|
I removed mine following JC’s excellent instructions in this thread.
http://www.fordforums.com.au/showthr...g+AU+door+trim
__________________
Current Ride 2012 Mitsubishi Triton Dual Cab ute  :
|
||
|
|
|
|
20-08-2006, 10:48 AM
|
#5 | ||
|
06 SS Thunder Ute
Join Date: Feb 2006
Posts: 115
|
hmmm okay. Ill go have another look and if i get stuck again ill get back to u all. Thanks guys.
__________________
Ford..Holden.. Not fussed lol |
||
|
|
|
|
20-08-2006, 04:15 PM
|
#6 | ||
|
06 SS Thunder Ute
Join Date: Feb 2006
Posts: 115
|
EVENTUALLY i got it off. i didnt have the right tools to start with, but when i got a sprocket set it was a treat. Thanks for the help guys! much apprecitated!
__________________
Ford..Holden.. Not fussed lol |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
AU Door Trim
Linear Mode
