Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 18-09-2006, 09:50 AM   #1
james22
With da Warlords
 
james22's Avatar
 
Join Date: May 2006
Location: Orange NSW
Posts: 1,781
Default Legal Ride Height

There seems to be a lot of confusion on this subject. So I talked to my uncle who is a mechanic on friday and he rang the NSW RTA to clarify the details.

This ride height only applies to NSW residents, with ANY model falcon and SEDANS only.

FRONT:
Minimum Height From Ground to Top of Lens on Headlight = 600mm
(Optimal Height = 610mm, for Suspension settling & Additional weight)

Minimum Ground Clearance Under Car = 100mm.

REAR:

Minimum Ground Clearance Under Car = 100mm.


So there it is. The word straight from the horses mouth :

__________________
You don't have to be faster than the bear, you just have to be faster than the slowest guy running from the bear.

For Sale: Parachute. Only used once, never opened, small stain.

Windsor Warlords
AU III XR-8220
300+ rwhp of Manual fun

XR50T Ute - 300rwkw (give or take depending on the day)
james22 is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 10:16 AM   #2
Built2redline
Regular Member
 
Join Date: Apr 2005
Location: sydney
Posts: 106
Default

damn my exhaust hangs 60mm off the ground....
Built2redline is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 10:26 AM   #3
RG
Back to Le Frenchy
 
RG's Avatar
 
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
Default

I'm not going on any road trips to N.S.W then.
__________________
Quote:
Originally Posted by drew`SEVNT5
nah mate, aussie cars are the besterest and funnerest, nothing beats them, specially a poofy wrong wheel drive
07 Renault Sport Megane F1 Team R26 #1397
RG is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 10:32 AM   #4
james22
With da Warlords
 
james22's Avatar
 
Join Date: May 2006
Location: Orange NSW
Posts: 1,781
Default

what suspension set up do you have. I want to lower my car thats why i got the legal heights?
__________________
You don't have to be faster than the bear, you just have to be faster than the slowest guy running from the bear.

For Sale: Parachute. Only used once, never opened, small stain.

Windsor Warlords
AU III XR-8220
300+ rwhp of Manual fun

XR50T Ute - 300rwkw (give or take depending on the day)
james22 is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 10:40 AM   #5
RG
Back to Le Frenchy
 
RG's Avatar
 
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
Default

Quote:
Originally Posted by james22
what suspension set up do you have. I want to lower my car thats why i got the legal heights?
Buggered if I know, it was like that when I bought it.
__________________
Quote:
Originally Posted by drew`SEVNT5
nah mate, aussie cars are the besterest and funnerest, nothing beats them, specially a poofy wrong wheel drive
07 Renault Sport Megane F1 Team R26 #1397
RG is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 10:52 AM   #6
xr8man83
Grunt Files
 
xr8man83's Avatar
 
Join Date: Apr 2006
Location: Rockhampton QLD
Posts: 466
Default

Quote:
Originally Posted by RedXR8220
Buggered if I know, it was like that when I bought it.
does look like its slammed though
xr8man83 is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 11:28 AM   #7
XR6-VCT-2000
Fantastic Plastic
 
XR6-VCT-2000's Avatar
 
Join Date: Jan 2006
Location: Mars most of the time
Posts: 2,019
Default

Same law here in Victoria , 100mm clearance to the ground from the lowest hanging part on your car ( usually the exhaust ) .
__________________
------------------------------------------------------------

:eclipsee_
XR6-VCT-2000 is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 11:34 AM   #8
Xrsick
Regular Member
 
Xrsick's Avatar
 
Join Date: Apr 2006
Location: Melbourne Australia
Posts: 128
Default

Quote:
Originally Posted by RedXR8220
I'm not going on any road trips to N.S.W then.
Same restrictions apply in Victoria also! There seems to be a an old wives tale about using coke cans as measuring guage!!!
Xrsick is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 12:49 PM   #9
james22
With da Warlords
 
james22's Avatar
 
Join Date: May 2006
Location: Orange NSW
Posts: 1,781
Default

yeah same up here. dont know where that came from
__________________
You don't have to be faster than the bear, you just have to be faster than the slowest guy running from the bear.

For Sale: Parachute. Only used once, never opened, small stain.

Windsor Warlords
AU III XR-8220
300+ rwhp of Manual fun

XR50T Ute - 300rwkw (give or take depending on the day)
james22 is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 12:50 PM   #10
james22
With da Warlords
 
james22's Avatar
 
Join Date: May 2006
Location: Orange NSW
Posts: 1,781
Default

Quote:
Originally Posted by RedXR8220
I'm not going on any road trips to N.S.W then.

better avoid the boys in blue then lol.... :ymca:
__________________
You don't have to be faster than the bear, you just have to be faster than the slowest guy running from the bear.

For Sale: Parachute. Only used once, never opened, small stain.

Windsor Warlords
AU III XR-8220
300+ rwhp of Manual fun

XR50T Ute - 300rwkw (give or take depending on the day)
james22 is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 12:58 PM   #11
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by james22
yeah same up here. dont know where that came from
Perhaps a coke can is approximately 100mm high?
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 03:36 PM   #12
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

Its no where near 100mm. I dont know why people always say it. Coke can is 127.5 mm if I measured correctly. I think its to short the other way as well.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 06:02 PM   #13
AU3 HERROD XR8
XR8 M8
 
AU3 HERROD XR8's Avatar
 
Join Date: Aug 2006
Posts: 218
Default

whats the limit if you're in vic, or melbourne for that matter? i really don't pay much attention to my ride height as it's lowered by herrod anyway when a bought her, i'm thinking of going lower (if i can)
__________________
The King of the jungle doesn't whistle.. he roars!
AU3 HERROD XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 06:16 PM   #14
RG
Back to Le Frenchy
 
RG's Avatar
 
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
Default

Quote:
Originally Posted by james22
better avoid the boys in blue then lol.... :ymca:
Well that's it, i'm screwed.
__________________
Quote:
Originally Posted by drew`SEVNT5
nah mate, aussie cars are the besterest and funnerest, nothing beats them, specially a poofy wrong wheel drive
07 Renault Sport Megane F1 Team R26 #1397
RG is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 06:20 PM   #15
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

Quote:
Originally Posted by Xrsick
Same restrictions apply in Victoria also! There seems to be a an old wives tale about using coke cans as measuring guage!!!
I think a cigarette packet was closer to the 100mm mark.
Also width of hand across the palm was a rough estimate as well.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2006, 06:43 PM   #16
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by The Monty
Its no where near 100mm. I dont know why people always say it. Coke can is 127.5 mm if I measured correctly. I think its to short the other way as well.
How is 27.5mm no where near? It's only an inch out (roughly), so as a guide, it would do. That's all it is (the coke can) - a guide.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 19-09-2006, 01:29 PM   #17
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

Quote:
Originally Posted by JC
How is 27.5mm no where near? It's only an inch out (roughly), so as a guide, it would do. That's all it is (the coke can) - a guide.
I guess you are right. Probably would come in handy at times. :
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 20-09-2006, 02:29 PM   #18
nicko_bud
Regular Member
 
nicko_bud's Avatar
 
Join Date: May 2006
Location: Adelaide
Posts: 157
Default

Hey Guys,

Found some info for SA guys from trasport sa website

http://www.transport.sa.gov.au/pdfs/...ack_suspen.pdf


Suspension height
The ride height of your vehicle may be
lowered, subject to the following conditions
being met:
• the suspension retains at least two thirds
of its original travel
• the distance between any part of the
vehicle and the ground is not less than
100mm.

the PDF also goes states the legal wheel track requirements of aftermarket wheels
nicko_bud is offline   Reply With Quote Multi-Quote with this Post
Old 20-09-2006, 02:38 PM   #19
XR6-VCT-2000
Fantastic Plastic
 
XR6-VCT-2000's Avatar
 
Join Date: Jan 2006
Location: Mars most of the time
Posts: 2,019
Default

I think the old 'can of coke' measurement was around what height the lowest part of the car should of been 'without' any passengers in the car.
That height then 'with' passenger weight usually brought the car down to around the lowest legal limit....Roughly ! .

Cheers.
__________________
------------------------------------------------------------

:eclipsee_
XR6-VCT-2000 is offline   Reply With Quote Multi-Quote with this Post
Old 20-09-2006, 02:58 PM   #20
Jeeepers
Merry Xmas To All
 
Jeeepers's Avatar
 
Join Date: Feb 2006
Location: Melton South, Moderator: ORSM Club
Posts: 3,413
Default

Quote:
Originally Posted by Xrsick
Same restrictions apply in Victoria also! There seems to be a an old wives tale about using coke cans as measuring guage!!!
Not a wives tale, the law used to 6 inches (150mm) About a can height, back in the late 70's early 80's. Not sure what year it changed, but glad it did.
Jeeepers is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 08:40 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL