Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 22-12-2006, 02:57 PM   #1
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default custom extractors where to get?

Guys just a quickie..D you guys know where I can get some custom made extractors in Sydney? I have a design in mind that I would like to try and believe it will kick ***.

__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2006, 04:07 PM   #2
poolkeeper
Its Resonating!
 
poolkeeper's Avatar
 
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
Default

lets see your design please....
poolkeeper is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2006, 04:25 PM   #3
Ruger
Bseries Moderator
 
Ruger's Avatar
 
Join Date: Jan 2005
Location: Sydney
Posts: 3,928
Default

...6-1?

Edit: actually i do know a guy who makes them pm me if you want details but ill tell you what they aint gonna be cheap. his work is top notch though he mainly does cages but if you convince him enough he might make you a set of pipes. word of warning though he wont fit them for you though. afaik its all stainless as well hes got hands of gold all his welds are like machine welds
__________________
Long Live the Rugerspeed Primer Destroyer!

Only those that attempt the absurd achieve the impossible.


Serviced and maintained by Mascot Auto Repairs
Ruger is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2006, 05:31 PM   #4
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Not telling.Its gonna be expensive and if it doesnt work and you guys copy me then your in the poo with me. I reckon the useless extractors will be the best in Australia if probabilities are on my side.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2006, 05:35 PM   #5
loxxr6
XB in parts...
 
loxxr6's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,890
Default

Liverpool Exhaust should be able to sort you out. They do custom work (and have done all my cars).

http://www.liverpoolexhaust.com.au/livoexh/
__________________


Daily Driver 2019 Ford Escape...looking for XR6T's.


loxxr6 is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 09:39 AM   #6
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Touch red and buy a lottery ticket Loxx. Last night my bro in law who owns a circuit racing replca shelby cobra said the same thing.Thanks for that.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 10:07 AM   #7
Mark351
Built Ford Tough
 
Mark351's Avatar
 
Join Date: Jan 2005
Location: State of Euphoria Mod: F-Series
Posts: 3,035
Default

You know something all the other header designers and manufacturers don't know?
__________________
Black on white '83 SWB F100 C6 auto 351C on gas and on the ground --> Project Thread
'55 F100, just a roller at the moment, new project
Silver MY12 Volkswagen Amarok
Mark351 is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 10:23 AM   #8
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default

yeah 6 pipes hanging out the bottom of the engine bay, lol
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 10:23 AM   #9
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by DeathXR
You know something all the other header designers and manufacturers don't know?
Yeh, apparently. This I have to see!
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 12:01 PM   #10
xr8ute
Back on the road
 
xr8ute's Avatar
 
Join Date: Dec 2004
Location: Wollongong, NSW
Posts: 3,205
Default

Quote:
Originally Posted by DeathXR
You know something all the other header designers and manufacturers don't know?
You dont think even aftermarket (aka take-them-off-the-shelf-and-bolt-them-on) headers are comprimised in any way..?
__________________
-------------------------------------------------------------------------

AU XR8 Ute 13.90 @ 100mph - http://www.aufalcon.com/xr8ute
5L Windsor, GT40X heads, Crane 2030, Pacey 4-1s, Lukey 3", 3.91:1, auto. Tuned by me w/Quarterhorse and BinaryEditor.

Coming Soon: Ported lower intake, Tickford "Premium" Brakes, and a good wash.
xr8ute is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 02:51 PM   #11
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by DeathXR
You know something all the other header designers and manufacturers don't know?
Yes I do know something that header manufacturers do not know. I have seen the proof of the design on other cars and a poos all over all others as far as power goes. Dyn and 1/4 mile times typically are better but as I said I am keeping tight lipped because I am taking the chance and also with my cash.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 02:52 PM   #12
dansedgli
FF.Com.Au Hardcore
 
dansedgli's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
Default

Good luck with it mate. Be interesting to see if you can out do the big companies.
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi.
dansedgli is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 02:56 PM   #13
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Thanks Dan. I will know once I get to the track when its all done.Might even be slower but who knows??I will try it.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 03:05 PM   #14
Mark351
Built Ford Tough
 
Mark351's Avatar
 
Join Date: Jan 2005
Location: State of Euphoria Mod: F-Series
Posts: 3,035
Default

Quote:
Originally Posted by xr8ute
You dont think even aftermarket (aka take-them-off-the-shelf-and-bolt-them-on) headers are comprimised in any way..?
If they're made to conform to (or not wildly exceed) legal requirements, then like everything, of course they are. If legalities are not an issue, then I'd look at what the guys racing cars with these engines do, which is perhaps what has inspired the ideas. Innovation is a good thing so it'll be interesting to see what comes out at the other end.
__________________
Black on white '83 SWB F100 C6 auto 351C on gas and on the ground --> Project Thread
'55 F100, just a roller at the moment, new project
Silver MY12 Volkswagen Amarok
Mark351 is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 03:22 PM   #15
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Thanks death xr you have a good attitude. I have an idea in my head and will put my money where my mouth is.I could win.I could lose.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 03:46 PM   #16
Mark351
Built Ford Tough
 
Mark351's Avatar
 
Join Date: Jan 2005
Location: State of Euphoria Mod: F-Series
Posts: 3,035
Default

If it only hurts your wallet, then it's all good. Can't succeed if you don't try!
__________________
Black on white '83 SWB F100 C6 auto 351C on gas and on the ground --> Project Thread
'55 F100, just a roller at the moment, new project
Silver MY12 Volkswagen Amarok
Mark351 is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 04:20 PM   #17
sbutler
335 kw of goodness
 
sbutler's Avatar
 
Join Date: Dec 2004
Location: south of Newcastle
Posts: 6,242
Default

Quote:
Originally Posted by JC
Yeh, apparently. This I have to see!
Yep this is gonna be good, I cant wait??
Nothing ventured, nothing gained.. :eclipsee_

Useless::: liverpool exhaust will be able to do what ever you have in mind..
__________________
CAUTION!
STILL Contain's opinion's & fact's that may offend !!!
:



2012 GTP 213 black what was I thinking? NOW FOR SALE>>
http://www.fordforums.com.au/showthread.php?t=11439680
sbutler is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 04:45 PM   #18
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by dansedgli
Good luck with it mate. Be interesting to see if you can out do the big companies.
If they're successful, I hope they're not marketed as "Useless extractors" LOL. No-one would buy them!
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 04:53 PM   #19
dansedgli
FF.Com.Au Hardcore
 
dansedgli's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
Default

Quote:
Originally Posted by JC
If they're successful, I hope they're not marketed as "Useless extractors" LOL. No-one would buy them!

__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi.
dansedgli is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 05:56 PM   #20
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

I dont want to outdo the companies.I just want the car to go quicker.But it would be funny.."useless extractors" hehe
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2006, 06:02 PM   #21
poolkeeper
Its Resonating!
 
poolkeeper's Avatar
 
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
Default

Quote:
Originally Posted by useless
I dont want to outdo the companies.I just want the car to go quicker.But it would be funny.."useless extractors" hehe
Id buy them though
Looking forward till what comes out in the end...
poolkeeper is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 10:44 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL