|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-01-2007, 01:39 PM
|
#1 | ||
|
Starter Motor
Join Date: Jun 2006
Posts: 23
|
Are the engine mounts the same between the 1.3, 1.6 and 2.0 litres escorts? Are all the engine conversions available for the 2 litre the same as those available for the 1.3 litre?
|
||
|
|
|
05-01-2007, 02:46 PM
|
#2 | ||
|
Regular Member
Join Date: Apr 2006
Posts: 72
|
Yes, all mk2 escorts have same engine mounts so yes 1.3, 1.6 and 2.0 will fit in any mk2 escort (ie no engine mount modifications needed)
|
||
|
|
|
|
06-01-2007, 08:05 AM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2005
Posts: 556
|
Early Escorts had a rectangular rubber engine mount while the later cars had a round rubber mount. Pinto (2.0lt) are different to X-Flow (1300/1600) Try and match up your existing mounts with a new poly mount. For the same of $80-90 its well worth buying new as the original or 2nd hand mounts are usually pretty shagged and are only good for moking up.
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Are the engine mounts the same between the 1.3, 1.6 and 2.0 litres escorts?
Linear Mode
