|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
16-01-2007, 07:04 PM
|
#1 | ||
|
Formerly eawags
Join Date: Apr 2005
Location: Gold Coast
Posts: 253
|
From what i read this will work as my car has done 270k and is cheaper for a wreckers bottom end than rebuild.
What will the compression be''Anything to watch for?
__________________
Territory SY TX RWD povo pak 7 seater Mods done: Terri intake pipe  , 2.5'' exhaust, 20% tint AND some Daz magic fingers work.Mods to come: Paceys, stall, under drives, MACE spacer and lowered. |
||
|
|
|
16-01-2007, 07:08 PM
|
#2 | ||
|
rofl copter
Join Date: Aug 2005
Location: Werribee
Posts: 3,692
|
if your not decking the block or head with an au gasket it should be fine. u can get away with a 20-40 thou off the head/block but wouldnt go much higher.
__________________
GQ patrol.
.... thats all |
||
|
|
|
|
17-01-2007, 01:57 PM
|
#3 | ||
|
Formerly eawags
Join Date: Apr 2005
Location: Gold Coast
Posts: 253
|
What happens with the power steer tensioner and running the water pump/clutch fan?
A std AU bottom end is identical to an AU XR6 one isnt it?
__________________
Territory SY TX RWD povo pak 7 seater Mods done: Terri intake pipe , 2.5'' exhaust, 20% tint AND some Daz magic fingers work.Mods to come: Paceys, stall, under drives, MACE spacer and lowered. |
||
|
|
|
|
17-01-2007, 02:11 PM
|
#4 | ||
|
Oops, I slipped....
Join Date: Dec 2004
Location: Adelaide, SA
Posts: 1,861
|
Have a look at this thread, it answers your questions, and is also a sticky in the E-Series technical area.....
http://www.fordforums.com.au/showthread.php?t=74982
__________________
1995 EF Fairmont 5.0 Heritage Green - BTR with TCI 2500 stall - Ported E7's - Pacemaker Tri-Y's - 3" Mandrel-bent Lukey Exhaust 1984 XE S-Pack 250 Sno White - LPG - Single Rail - 2.5" Exhaust "Just because you don't understand something, does not make it wrong" |
||
|
|
|
|
18-01-2007, 09:39 AM
|
#5 | ||
|
Formerly eawags
Join Date: Apr 2005
Location: Gold Coast
Posts: 253
|
Read all that. People say one thing then others say something else. Not very good
__________________
Territory SY TX RWD povo pak 7 seater Mods done: Terri intake pipe , 2.5'' exhaust, 20% tint AND some Daz magic fingers work.Mods to come: Paceys, stall, under drives, MACE spacer and lowered. |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
AU bottom end ED xr6 head
Linear Mode
