|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
26-01-2007, 09:12 PM | #1 | ||
Regular Member
Join Date: Feb 2006
Posts: 394
|
Hey All,
In my other thread I am looking at possibly doing the great V8 conversion. My other choice is to buy an XR8, my question is are the series 1 XR8's any good? Do they have any known problems? Here is the link to the one I found Link |
||
26-01-2007, 09:51 PM | #2 | ||
nitroman
Join Date: Jun 2006
Location: Young
Posts: 322
|
Great car, the only beef I have is the brakes are a bit small when your'e hot footin' it.
__________________
AU1 XR8 E303 cam,Crane Rockers,Crane double valve springs,Rollmaster roller timing gears,Crow +80" pushrods,SS cold air induction, 2 1/2 inch custom exhaust,Capa flash tuner.KONI shocks. EF fairmont wagon. GASGAS 400 enduro. Honda hr192 mower |
||
27-01-2007, 04:15 AM | #3 | ||
V8 Ghia & BF2 XR6 + Wagon
Join Date: Dec 2004
Location: Adelaide
Posts: 1,569
|
AU2/3 220kw would be a better buy.
|
||
27-01-2007, 09:14 AM | #4 | ||
FF.Com.Au Hardcore
Join Date: Apr 2006
Location: Australia
Posts: 1,452
|
I've seen good 220 series 2/3 XR8's go for ~$15k, I reckon put in the extra if you can and go straight for that, there's the brakes for one thing, plus they look a lot better if you get one with the bodykit etc already.
|
||
27-01-2007, 09:26 AM | #5 | ||
BA Xr8
Join Date: Feb 2005
Location: NZ
Posts: 917
|
I've had both AU1 & AU2 XR8s, both awesome. Series 1 was more economical, the AU2 more grunt, AU1 chewed reg 91 gas, the AU2 was premium. Both where autos and both had the standard issue clunky drive lines in stop start traffic. Know probs with series 1 is radiator can spring a leak but a factory recall should have fixed the fault and the same problem that affects all IRS AU's the rear rubber shock mounts regularly need replacement (have a look under the carpet at the shock tower once you fold the rear seat down) . Having said that the AU2 needed this not mu AU1. Brakes are an issue if you do hard driving and they are mission to upgrade on the AU1 as AU2 had their whole system upgraded already. For me brakes were not an issue other than they need repalcing more often as the rotor is thinner in the AU1, more of a daily driver/play rather than track weapon.
My advice - get the AU1 if the price adds up, start playing with it if you get the horsepower bug. Make sure you get it checked properly as an XR thats had a hard life will be trouble. Also check under the bonnet/boot (particularly gas struts area) for rust. |
||
27-01-2007, 12:41 PM | #6 | |||
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 3,918
|
Quote:
|
|||
27-01-2007, 01:00 PM | #7 | ||
Miami Pilot
Join Date: Jan 2005
Location: ACT
Posts: 21,703
|
Yep, someone's nicked the perforated leather steering wheel, but otherwise it still looks like an XR. It has the XR cloth trim, and the adaptive shift auto sticker. Replacement wheel & airbag may be due to front crash where airbag deployed, so I'd get that checked thoroughly - if it has been repaired well, there should be no issues (look at The Dok's car).
I have an AU1 XR8, 185kw rated at the fly, which is normally around 127rwkw, but have around 144rwkw (about the same as an auto Au2 200kw XR) out of it now with simple mods. These are 4into1 Herrods headers, single 3" system and 1.72 roller rockers. It's also on gas and still puts out 138rwkw. Mine's a 99 model, but I previously owned a manual 98 model and never had any issues at all really. I think $13k is a bit much for an AU1 though - Around $11k for an AU1 would be better, as you can spend the difference between that on an AU2 (say $4k difference) on the above mods, plus get a momo wheel and paint the airbag black, and upgrade to AU2 front brakes for around $1k, or get DBA or RDA slotteds all round for aroud $400 to $500. You'll end up with a car that puts out around 200kw at the engine and runs on 91 ULP!!! Plus if you're thinking about getting the XR50 kit, it doesn't really matter whether you start from an AU1 base or AU2 - the XR50 fits both. Also, as far as fuel consumption difference between the I6 and the V8 goes (in case you're worried), I used to get around 14 to 15 l/100km on petrol (now around 18l/100km on LPG), whereas my XR6 VCT was around 13 to 14, and the forte wagon is around 12 to 15. This is all mixed cycle. On the highway, both motors will get under 10l/100km - eg Yass to Melbourne one tank each. So there's not much in it in terms of fuel costs - around $5 per tank per 400km or thereabouts.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
27-01-2007, 10:01 PM | #8 | ||
Banned
Join Date: Jan 2005
Location: Qld Moderator
Posts: 3,731
|
Both great cars have AUI XR8 and AUII XR6.
|
||
27-01-2007, 10:38 PM | #9 | ||
BOSS 5.4L Enthusiast
Join Date: Aug 2005
Posts: 21,941
|
Personbally i'd wait and try to get yourself into a Series II XR8, they look & Go better and if your lucky you will score one with a 220 in it...
|
||
Thread Tools | |
Display Modes | |
|