|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
06-02-2007, 03:00 PM | #1 | ||
Bodysnatcher
Join Date: Jul 2006
Posts: 130
|
well i finally got my mk4 ghia back together and slammed the bonnet shut only to realise...****, i left the radiator cap off somewhere under the bonnet.
when i went to pull the cable release i think it either snapped or slipped out of its mount in the engine bay because theres no tension on it. please, somebody has to have had this problem before and i really want to get this bastard out of my garage today and on the road, so any help on a manual release or something like that is much appreciated. |
||
06-02-2007, 03:16 PM | #2 | ||
PM me if you want
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
|
any space to get your hand up behind the radiator and then push the holding pin accross, otherwise rip the grille out (not preferred)
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA Send me a PM if you want to know anything 2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
|
||
06-02-2007, 03:30 PM | #3 | |||
Bodysnatcher
Join Date: Jul 2006
Posts: 130
|
Quote:
|
|||
06-02-2007, 03:32 PM | #4 | ||
PM me if you want
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
|
right up the top, this is from memory
it has a big pin with a spring and the pin is spear shaped at the end, the actual locking bit is just a spring loaded slide that when the spear passes past it, the slide flicks back to hold it from popping up.
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA Send me a PM if you want to know anything 2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
|
||
06-02-2007, 03:57 PM | #5 | ||
Bodysnatcher
Join Date: Jul 2006
Posts: 130
|
damnit, cant find any way to get my hand up in there and i dont really wanna bust up the grille. screw this, a job for another day.
|
||
06-02-2007, 06:00 PM | #6 | ||
Starter Motor
Join Date: May 2006
Posts: 13
|
a screwdriver onto pivot pin and push,takes a bit, but can be done...just get the angle right
|
||
11-02-2007, 05:08 PM | #7 | ||
Bodysnatcher
Join Date: Jul 2006
Posts: 130
|
managed to get it open with someone pushing down on the bonnet while i pulled the cable, radiator cap was wedged under the cable and stretched it, so ill have to tighten the bastard up now.
|
||
Thread Tools | |
Display Modes | |
|