|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
18-02-2007, 11:12 PM | #1 | ||
Starter Motor
Join Date: May 2006
Posts: 9
|
My remote boot release has failed - doesn't work with either the remote or the dash button. Dont have a manual so would appreciate advice about where to start hunting the solution.
Thanks in advance........................................... ............Darryl |
||
19-02-2007, 12:02 PM | #2 | ||
Starter Motor
Join Date: Feb 2007
Posts: 9
|
Yes Darryl, Iam having the same trouble at the moment, and the boot light wont switch on. I read that the switch is in the boot release but I would like to know a remedy before starting to fix it?
|
||
19-02-2007, 01:13 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 2,981
|
What happens when you press the button? can you hear it?
|
||
19-02-2007, 04:14 PM | #4 | ||
Starter Motor
Join Date: Feb 2007
Posts: 9
|
Thanks Stockoau, My lights flash as they should but no noice from the release.?
|
||
19-02-2007, 07:49 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
|
Lol you're gonna have to crawl into the boot with a torch and inspect it If you're lucky you'll be able to open it (should be a pull cord to pop it)
|
||
Thread Tools | |
Display Modes | |
|