Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au
Reload this Page New air box, well sortta.
Register FAQ Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 24-04-2007, 11:43 PM   #1
TICK4D-TAS
Club Moderator
 
Join Date: Dec 2004
Location: Tas
Posts: 3,744
Default New air box, well sortta.
just thought i would throw up a couple of pics of my air box. i modified an F6 lower intake into the au airbox. had to cut the intake down a bit so it fitted and didnt rub on the head light.
TICK4D-TAS is offline   Reply With Quote Multi-Quote with this Post
Old 24-04-2007, 11:49 PM   #2
StealthAu
FF.Com.Au Hardcore
 
Join Date: Sep 2006
Posts: 2,981
Default
much rooting around to fit it?
StealthAu is offline   Reply With Quote Multi-Quote with this Post
Old 24-04-2007, 11:49 PM   #3
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default
looks pretty good, have you run it yet to see how much of a difference it made?
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 24-04-2007, 11:56 PM   #4
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default
Nice one, Ive got an airbox ready to go to do this very same thing. How do you find it?
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 24-04-2007, 11:58 PM   #5
TICK4D-TAS
Club Moderator
 
Join Date: Dec 2004
Location: Tas
Posts: 3,744
Default
Quote:
Originally Posted by stockoau
much rooting around to fit it?
a little, but was worth it. i had an old lower airbox that i had a 80mm hole in b4 this one, so i used that as a template. i had to cut about 30mm off the end of the f6 intake and angle one side for the slope of the au front and that was about it. once i was happy with it, i made a cardboard template and traced it onto the good airbox and then cut it out with a mini hacksaw and used a file to smoothen it up. all up it took about 2hrs and im happy with the end result. looks factory and neat.


Quote:
Originally Posted by bodes-sh
looks pretty good, have you run it yet to see how much of a difference it made?
Quote:
Originally Posted by b2tf
Nice one, Ive got an airbox ready to go to do this very same thing. How do you find it?
had it out once in the day and once at night. there is a slight increase in the intake noise (but thats a good thing) and it feels like it has a better throttle response and a slightly better pick up.
TICK4D-TAS is offline   Reply With Quote Multi-Quote with this Post
Old 25-04-2007, 07:40 AM   #6
Sledgehammer
Banned
 
Sledgehammer's Avatar
 
Join Date: Jan 2005
Location: Qld Moderator
Posts: 3,731
Default
Looks like a good fit their, well done.
Sledgehammer is offline   Reply With Quote Multi-Quote with this Post
Old 25-04-2007, 08:06 AM   #7
AU2PWR
Spin 'em Habib !
 
AU2PWR's Avatar
 
Join Date: Jul 2005
Location: Cranbourne Victoria
Posts: 3,854
Default
That Looks Good TICK4D-TAS , I Just Chucked the WHOLE f6 Airbox into mine .. but i would of gone that way if i hadnt done already :_


__________________
AU2PWR
AU2PWR is offline   Reply With Quote Multi-Quote with this Post
Old 25-04-2007, 01:05 PM   #8
TICK4D-TAS
Club Moderator
 
Join Date: Dec 2004
Location: Tas
Posts: 3,744
Default
Quote:
Originally Posted by AU2PWR
That Looks Good TICK4D-TAS , I Just Chucked the WHOLE f6 Airbox into mine .. but i would of gone that way if i hadnt done already :_
i toyed with this idea of fitting the whole thing, but after a trial fit with a friends ba air box, it was too much stuffing around to mount the maf onto the airbox lid.
TICK4D-TAS is offline   Reply With Quote Multi-Quote with this Post
Old 25-04-2007, 06:13 PM   #9
Dark Horse
_Oo===oO_
 
Dark Horse's Avatar
 
Join Date: Dec 2004
Location: Canberra
Posts: 1,471
Default
Quite a neat and effective little setup Tim.
__________________
COURAGE - ENDURANCE - MATESHIP - SACRIFICE
Dark Horse is offline   Reply With Quote Multi-Quote with this Post
Old 25-04-2007, 06:58 PM   #10
NC1183
FF.Com.Au Hardcore
 
NC1183's Avatar
 
Join Date: Apr 2005
Location: Moree, NSW
Posts: 2,076
Default
The pics aren't working for me TICK4D-TAS
__________________
Nathan

2005 FPV BF Super Pursuit

The new toy (now sold)
The SP


The old ute (sold)
www.aufalcon.com/nc1183

Build Thread


Quote:
Originally Posted by F6T
If you look closely you can see the remains of a Hyundai excel that’s been sucked into the intake.
about the pic of 'CHOP YA' F6
NC1183 is offline   Reply With Quote Multi-Quote with this Post
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Forum Jump


All times are GMT +11. The time now is 10:42 PM.

Australian Ford Forums - Privacy Statement - Terms of Service - Top

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL