Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 18-10-2006, 01:42 PM   #1
frd_crzer
:D:D
 
frd_crzer's Avatar
 
Join Date: Jul 2006
Location: Werribee
Posts: 913
Default AU 99 Futura locking stuffed

hi peeps
on my AU when i go to lock the car with the control the lock goes down then comes up again and then it lets the horn go off but when i do it with the key it locks fine and unlocks fine with the key but when i use the control to unlock it all the doors are unlock except the drivers door any ideas.

frd_crzer is offline   Reply With Quote Multi-Quote with this Post
Old 18-10-2006, 01:44 PM   #2
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default

lock it with the key, then go around and pull on each of the door handles, one of the actuators will be the problem, whichever door opens that will be the one....unless more than one does lol...apparently they're pretty easy to replace, i don't know, i've never had to do it before...
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 18-10-2006, 01:49 PM   #3
frd_crzer
:D:D
 
frd_crzer's Avatar
 
Join Date: Jul 2006
Location: Werribee
Posts: 913
Default

yer ive done that its the drivers door that opens. but the mechanizm has a funny sound to it its not normal.
frd_crzer is offline   Reply With Quote Multi-Quote with this Post
Old 18-10-2006, 01:52 PM   #4
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default

that's the broken one then, you need to replace that one and it will be ok
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 18-10-2006, 03:11 PM   #5
TwistedEL
FF.Com.Au Hardcore
 
TwistedEL's Avatar
 
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
Default

Take the trim off and you will need a spline bit to pull the lock out, it's a really simple job
The drivers one is a bite more compllicated than the others due to the key & button.
TwistedEL is offline   Reply With Quote Multi-Quote with this Post
Old 18-10-2006, 05:53 PM   #6
skap
Regular Member
 
Join Date: Oct 2005
Posts: 39
Default

You need a set of torx bits i think. Also i think the wiring changes with the AU lock actuator but whichever spare parts you buy it from will probably let you know. And supply you with the new wiring kit.

Anthony
skap is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:59 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL