|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
25-11-2006, 07:18 PM
|
#1 | ||
|
Starter Motor
Join Date: Nov 2006
Posts: 8
|
The indicator lights on my KC laser have stopped working and i am at a loss as to what is at fault. I checked all the fuses and main fuses which seem to be ok, i checked all the elactrical cables which seem to also be ok. I even changed the flasher unit with a brand new one but still only the hazards work and not the Left and Right indicators. Can anyone please help!!! Im going crazy with this!!!THANKS.
|
||
|
|
|
25-11-2006, 07:26 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
have to wait for a laser owner ...
so current problem is no indicators when the car is running hazards are linked directly to the battery through the hazard switch and fuse seperate fuse for indicators I think so should work without the ignition key key has to be on ign for the blinkers to work or engine running if the fuse is good you are only really left with the stalk control on the steering column at fault
__________________
My car goes Brumm Brumm |
||
|
|
|
|
25-11-2006, 07:41 PM
|
#3 | ||
|
Starter Motor
Join Date: Nov 2006
Posts: 8
|
THats right, they dont work at all when car is running but the problem is i cannot locate the separate fuse for the indicators. I have not been able to locate it at all. I think the stalk would be the last resort
|
||
|
|
|
|
26-11-2006, 06:36 PM
|
#4 | ||
|
What a performer!
Join Date: Jul 2005
Location: SA, Northern Suburbs
Posts: 599
|
Checked the globes? Maybe something blew them both out? LOL worth a shot.
__________________
1981 Ford Laser KA :: E5 :: 2002-2003 1989 Ford Laser KE TX3 :: BP :: 2003-2007 75fwkW 1990 Ford Laser KF TX3 :: BP :: 2010-2011 1991 Ford Laser KF TX3 :: BP-T :: 2011-2015 109fwkW 2007 Ford Falcon BF XR6 Turbo Ute :: Barra 245T :: 2014-2019 324rwkW 1998 Ford Falcon AU XR8 Ute :: Windsor V8 :: 2019-2020 2008 Ford Fiesta XR4 :: Duratec 150 :: 2021-* 1998 Ford Falcon AU XR6 :: HP Intech :: 2021-* |
||
|
|
|
|
29-11-2006, 11:30 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Canberra
Posts: 13,436
|
Pretty sure indicators have a relay, hence the audible clicking noise when they are on. Might be one of them buggered?
|
||
|
|
|
KC Laser indicators not working
Linear Mode
