Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 16-10-2006, 12:57 AM   #1
misstx3
******
 
Join Date: Oct 2006
Location: Melbourne
Posts: 8
Arrow Tx3 Turbo.. Can Any1 Help A Gal Out?

Hey all, I have just recently bought a 92 kh2 4wd tx3 turbo. I have had a few probs..If anyone could lend there expertise?? :
Q1- When my car reaches a certain rev it beeps and cuts out.. Are these cars installed with some kind of rev limiter??
Q2- Just the past day it feels as though when my car is hitting boost that there is no power.. Does anyone know why this would be happening?? :


Last edited by misstx3; 16-10-2006 at 01:14 AM.
misstx3 is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 06:48 AM   #2
AUIIForte
Regular Member
 
Join Date: Nov 2005
Posts: 295
Default

At what rev count does it beep and cut out at? And for your second questions, make sure that theres still a turbo in the car, maybe the previous owner took it out?
AUIIForte is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 07:26 AM   #3
dansedgli
FF.Com.Au Hardcore
 
dansedgli's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
Default

The piping may be heat soaked causing the lack of power on boost. This used to happen to me on hot days after sitting in traffic for a while.

Im not sure on your other problem though.
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi.
dansedgli is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 11:15 AM   #4
Ghiadude
FORMERLY TX3DUDE
 
Ghiadude's Avatar
 
Join Date: Jan 2005
Location: "THE GONG"
Posts: 2,487
Default

sounds like your hitting the boost cut itll hit in the higher gears sooner as the car comes onto load. Do you have a boost gauge? if you do you mighrt find your up around the 14psi mark at full load. check all your wastegate plumbing. as for the lack of power it could be anything from boost fluctuations to flat tyres. What are you using to control boost?? and what mods does the car have?
__________________
Quote:
Originally Posted by AL NZ
it wouldn't matter what FPV or FordOz call it, because it will be - The One.
Ghiadude is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 05:53 PM   #5
VippiN
What a performer!
 
VippiN's Avatar
 
Join Date: Jul 2005
Location: SA, Northern Suburbs
Posts: 599
Default

Quote:
Originally Posted by misstx3
Hey all, I have just recently bought a 92 kh2 4wd tx3 turbo. I have had a few probs..If anyone could lend there expertise?? :
Q1- When my car reaches a certain rev it beeps and cuts out.. Are these cars installed with some kind of rev limiter??
Q2- Just the past day it feels as though when my car is hitting boost that there is no power.. Does anyone know why this would be happening?? :
Q1 - You're hitting fuel cut. Your boost is up too much and the ECU is saying no thanks.

Q2- Could be a million different things.. Don't know where to start with limited information provided.
__________________
1981 Ford Laser KA :: E5 :: 2002-2003
1989 Ford Laser KE TX3 :: BP :: 2003-2007 75fwkW
1990 Ford Laser KF TX3 :: BP :: 2010-2011
1991 Ford Laser KF TX3 :: BP-T :: 2011-2015 109fwkW
2007 Ford Falcon BF XR6 Turbo Ute :: Barra 245T :: 2014-2019 324rwkW
1998 Ford Falcon AU XR8 Ute :: Windsor V8 :: 2019-2020
2008 Ford Fiesta XR4 :: Duratec 150 :: 2021-*
1998 Ford Falcon AU XR6 :: HP Intech :: 2021-*
VippiN is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 05:57 PM   #6
misstx3
******
 
Join Date: Oct 2006
Location: Melbourne
Posts: 8
Default

I haven't really taken much notice at exactly how many revs it cuts out at.. I think it may be just over 3 but i will check that out.. It does only happen in 4th and 5th gears. I do have a boost gauge but Seeing as I have only had the car a few weeks I have been taking it easy until i get it a good service, proper oil etc.. and also the cut off thing freaks me out a little cause i was unsure of what it did exactly that I have been taking it easy. The hardest I have driven it so far (not full potential) hit bout 11psi. No mods really.. Only a blow off vaulve. Everything else is pretty much stock. I don't know very much about the tx3 turbo.. maybe should have done my homework a little better ;-) I am used to my old vl turbo..
misstx3 is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 05:59 PM   #7
misstx3
******
 
Join Date: Oct 2006
Location: Melbourne
Posts: 8
Default

I think i'd realise the turbo missing!!
misstx3 is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 06:05 PM   #8
misstx3
******
 
Join Date: Oct 2006
Location: Melbourne
Posts: 8
Default

Not exactly sure whats going on with the cut off thing? If it beeps twice the boost light will start flashing. As for the lack of power?? It just feels as though the car is revving out but not going anywhere? It has just started happening the past day or so. As well as I will be driving and as I slow down or change gear the car will just turn off and the ignition lights will come up? So many problems already... Why do i bother?? lol
misstx3 is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 06:37 PM   #9
9lives
Regular Member
 
9lives's Avatar
 
Join Date: Dec 2005
Location: Cronulla,Sydney
Posts: 172
Default

i would have kept the vl but hey thats me...

maybe the stock computer is hitting the boost cut off and thats why your loosing power as boost comes on.
:
__________________
You must be young and stupid to grow old and wise....
9lives is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 06:39 PM   #10
9lives
Regular Member
 
9lives's Avatar
 
Join Date: Dec 2005
Location: Cronulla,Sydney
Posts: 172
Default

oh and if its just turning off check all your plumbing hose clamps etc sounds like your loosing vacuum via a loose intake pipe similar causing it to stall
__________________
You must be young and stupid to grow old and wise....
9lives is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2006, 06:43 PM   #11
It'sTheVibe
Regular Member
 
It'sTheVibe's Avatar
 
Join Date: Dec 2005
Posts: 112
Default

Quote:
Originally Posted by misstx3
As for the lack of power?? It just feels as though the car is revving out but not going anywhere? It has just started happening the past day or so.
Sounds like a slipping clutch..
It'sTheVibe is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2006, 07:01 PM   #12
misstx3
******
 
Join Date: Oct 2006
Location: Melbourne
Posts: 8
Default

I know.. Wanted something smaller though.. ;-)
misstx3 is offline   Reply With Quote Multi-Quote with this Post
Old 26-10-2006, 11:54 AM   #13
It'sTheVibe
Regular Member
 
It'sTheVibe's Avatar
 
Join Date: Dec 2005
Posts: 112
Default

misstx3

Any luck with resolving these problems????
It'sTheVibe is offline   Reply With Quote Multi-Quote with this Post
Old 08-11-2006, 05:48 PM   #14
TheKeTx3
Tx32be
 
Join Date: Nov 2006
Location: Melbourne
Posts: 2
Default

I agree with Vippin i reckon you are hitting the fuel cut off .
TheKeTx3 is offline   Reply With Quote Multi-Quote with this Post
Old 11-11-2006, 12:20 PM   #15
sintx3
But why the rum
 
sintx3's Avatar
 
Join Date: Jan 2006
Location: Adelaide
Posts: 234
Default

Dont hate the car yet when u get it running properly you will love it its just allot of people that own these cars are cheap ***** and do dodgy things to get more power out of them not thinking of the concequences.
But ur first problem definatly seems like fuel cut try disconnecting the boost controller u have either bleed valve or electronic get a joiner piece to put the normal hoses back together and see how u go on stock boost they have 8psi stock cos if the cars running too much boost without a decent intercooler u could be getting allot of heat soak making it feel powerless.
__________________
1997 LS Focus XR5 turbo
sintx3 is offline   Reply With Quote Multi-Quote with this Post
Old 30-11-2006, 09:11 PM   #16
ReVd_uP
FF.Com.Au Hardcore
 
ReVd_uP's Avatar
 
Join Date: Aug 2005
Location: melbourne
Posts: 1,258
Default

Q2- sounds like it could be an obvious solution but i had the exact problem on my brothers tx3 which is my old car, turned out just to be the ignition leads.... give that a try
ReVd_uP is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 01:32 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL