Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 20-01-2007, 09:51 PM   #1
Au_Fairlane_man
Luxury Cruisin!
 
Au_Fairlane_man's Avatar
 
Join Date: Jan 2006
Location: Brissie!
Posts: 215
Default camber kits

sorry if this is already posted but i have a s1 au fairlane and have taken 4 inches out of the height i have a serious camber issue on 18's i have been told that there isnt such a thing but then i was told that there was can u guys help me please? :

__________________
DONT H8 THA PLAYA H8 THA GAME!!!!!!!!!!!!!!!!!!!!
Au_Fairlane_man is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2007, 10:03 PM   #2
wesomc
Regular Member
 
wesomc's Avatar
 
Join Date: Oct 2006
Location: Naracoorte SA
Posts: 168
Default

yeah, camber/caster kits are available for AU's. Are you talking front or rear? Basically most front kits are just replacement upper control arm mounts with longer mount studs to allow more shims to be packed in. Not sure on the rear, but i'd say if there isn't already enough adjustment there would be aftermarket kits such as offset bush type adjusters out there to suit.
wesomc is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2007, 10:19 PM   #3
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

I run them on the front but not on the back.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2007, 11:05 PM   #4
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Does the Fairlane have IRS? If so, then you can probably use the XR rear camber kit if required. There are definitely camber kits for the front for all falcons (and I assume Fairlanes). I just bought mine for $180 (incl. postage) for both sides from Mr Spares on ebay.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 21-01-2007, 02:17 AM   #5
blackers10
FF.Com.Au Hardcore
 
blackers10's Avatar
 
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
Default

front you can choose from nolathane..fulcrum(superpro)..noltec and a bunch of others!
you can get nolathane and fulcrum items from supercheap(come see me ill hook ya up)
just make sure you get the shim type..
pedders can align it good down at lawnton there!
they chuck shims in free with the alignment too i think (Was $65 for front end alignment)
__________________
On The Street Feature Winner Performance Ford Mag
See my car at:-www.aufalcon.com/blackers10
blackers10 is offline   Reply With Quote Multi-Quote with this Post
Old 21-01-2007, 06:44 PM   #6
Mark351
Built Ford Tough
 
Mark351's Avatar
 
Join Date: Jan 2005
Location: State of Euphoria Mod: F-Series
Posts: 3,035
Default

The K-Mac kit is a ratchet type, I have that one installed by Herrod.
__________________
Black on white '83 SWB F100 C6 auto 351C on gas and on the ground --> Project Thread
'55 F100, just a roller at the moment, new project
Silver MY12 Volkswagen Amarok
Mark351 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:23 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL