|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
20-05-2007, 03:10 PM
|
#1 | ||
|
Starter Motor
Join Date: May 2007
Posts: 14
|
can anyone tell me if my clutch is on its way out , have a 92 telstar when i release the clutch the car seems to shutter shake, to stop it doing that i have to give it more revs , thanks in advance
|
||
|
|
|
20-05-2007, 08:11 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
thats the pressure plate on its way out
so do it before you stop in the middle of a highway needing a tow end up with an expensive repair bill every clutch place machines the flywheel as well so allow for that expense on top of the clutch fitting
__________________
My car goes Brumm Brumm |
||
|
|
|
|
21-05-2007, 10:22 AM
|
#3 | ||
|
Starter Motor
Join Date: May 2007
Posts: 14
|
so your saying i just go to my mechanic and tell him to machine the flywheel?
|
||
|
|
|
|
21-05-2007, 01:14 PM
|
#4 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
yes if you intend to replace clutch pressure plate and throw out bearing
no need to do double te work or make your mechanic rich 
__________________
My car goes Brumm Brumm |
||
|
|
|
telstar clutch problem?
Linear Mode
