|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-04-2007, 09:38 AM
|
#1 | ||
|
Starter Motor
Join Date: Apr 2007
Posts: 4
|
greetings ford heads
could any of you gurus tell me or point me in the right direction to find out what the gap setting is for my cheap but very reliable '82 1.5 ford laser. i purchased a set of feeler gauges from auto one but at the time nobody in the shop could enlighten me as to the gap setting for me laser. many thanks i have a ka |
||
|
|
|
12-04-2007, 11:50 AM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
might have to wait till vippin the guru answers
I would first see what the gap is on the old set before adjusting or fitting the new set then a guess allowing for wear and pitting of the old set till you get the answer
__________________
My car goes Brumm Brumm |
||
|
|
|
|
13-04-2007, 08:24 AM
|
#3 | |||
|
Starter Motor
Join Date: Apr 2007
Posts: 4
|
Quote:
thanks for your reply and thanks for the tip but... sadly i had already taken out the old set (without taking any note) and put in the new. some one told me the gap should be about the thickness of the cardboad from a weetbix packet??? i used a nutrigrain packet...! maybe thats my problem? its just that my ka is running alittle hairy at the moment and i am putting it down to incorrect point setting, as thats the last thing i changed (about 3 weeks ago). cheeeeers |
|||
|
|
|
|
13-04-2007, 01:19 PM
|
#4 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
a quess then
try 18 to 16 thou and time to 5 degrees dont know if it is right where is vippen when we need him
__________________
My car goes Brumm Brumm |
||
|
|
|
|
13-04-2007, 10:34 PM
|
#5 | |||
|
Starter Motor
Join Date: Apr 2007
Posts: 4
|
Quote:
it would'nt hurt to try your suggestion... (only if vippen agrees of course) i have a ka |
|||
|
|
|
|
03-05-2007, 10:30 PM
|
#6 | ||
|
Regular Member
Join Date: Apr 2007
Posts: 49
|
20thou
|
||
|
|
|
|
07-05-2007, 01:24 PM
|
#7 | |||
|
Starter Motor
Join Date: Apr 2007
Posts: 4
|
Quote:
 :
|
|||
|
|
|
|
22-05-2007, 10:39 AM
|
#8 | |||
|
six shooter
Join Date: Jul 2005
Location: Heathcote (close to heathcote park)!
Posts: 14
|
Quote:
|
|||
|
|
|
ka points gap setting
Linear Mode
