|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-06-2007, 12:37 AM
|
#1 | ||
|
Starter Motor
Join Date: May 2007
Posts: 2
|
Hi guys I'm new here, anyways I have a 1985 TX5 Ghia. And lately auto windows have been causing lots of problems(like not winding up). Is there any way for me to get them to work manually? Any advice will help. Thanks in advance.
|
||
|
|
|
03-06-2007, 01:34 AM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
yes you only need to purchase the standard winding mechanisims handles and door openers and the door trims to go with it ..
the glass should be the same fitting check theses things out with a wrecker mazda and ford in that model are the same the wiring looms can stay in the doors and not be connected just remove the fuse after that the door trims come off and the window rails should be the same and also the bolt holes next sell the electrical set up on ebay or a forum or make a trade with a wrecker  :
__________________
My car goes Brumm Brumm |
||
|
|
|
|
03-06-2007, 09:41 PM
|
#3 | |||
|
Starter Motor
Join Date: May 2007
Posts: 2
|
Quote:
|
|||
|
|
|
From auto to manual windows?
Linear Mode
