Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 24-06-2007, 10:12 PM   #1
hegemon
Starter Motor
 
Join Date: May 2007
Posts: 17
Default Gearbox compatability

Gday,

It looks like I might need to replace my gearbox - normally a fatal problem on a $1000 car BUT, I've found a cheap one which could fit...

It's a 5sp. box from a 1.6lt carby KH Laser. My car is a 5sp KE carby.

Would the KH box fit in my KE?

Cheers.

hegemon is offline   Reply With Quote Multi-Quote with this Post
Old 25-06-2007, 09:18 AM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

have to wait for a laser guru to respond to that one
5 speed to 5 speed ok

ring a ford wrecker for a quicker answer

its the clutch spline
and do the housings to the motor and bolt holes match up
next the length of the cvs drive shafts

best get out the tape measure

dont forget to put in new cv joint seals on the box :togo:
__________________
My car goes Brumm Brumm

Last edited by dirty hands; 25-06-2007 at 09:23 AM.
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 25-06-2007, 10:28 AM   #3
VippiN
What a performer!
 
VippiN's Avatar
 
Join Date: Jul 2005
Location: SA, Northern Suburbs
Posts: 599
Default

Quote:
Originally Posted by hegemon
Gday,

It looks like I might need to replace my gearbox - normally a fatal problem on a $1000 car BUT, I've found a cheap one which could fit...

It's a 5sp. box from a 1.6lt carby KH Laser. My car is a 5sp KE carby.

Would the KH box fit in my KE?

Cheers.
Nope, they're different. You can use boxes from the KA,KB,KC,KE but personally i'd only recommend the KC,KE.

They're like $150-$200 from any U-PULL-IT/PICK-A-PART type wrecker. Cheap and common. Anything but a fatal problem.
__________________
1981 Ford Laser KA :: E5 :: 2002-2003
1989 Ford Laser KE TX3 :: BP :: 2003-2007 75fwkW
1990 Ford Laser KF TX3 :: BP :: 2010-2011
1991 Ford Laser KF TX3 :: BP-T :: 2011-2015 109fwkW
2007 Ford Falcon BF XR6 Turbo Ute :: Barra 245T :: 2014-2019 324rwkW
1998 Ford Falcon AU XR8 Ute :: Windsor V8 :: 2019-2020
2008 Ford Fiesta XR4 :: Duratec 150 :: 2021-*
1998 Ford Falcon AU XR6 :: HP Intech :: 2021-*
VippiN is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:01 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL