Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 19-05-2007, 10:56 PM   #1
jak_a
Starter Motor
 
Join Date: May 2007
Posts: 14
Default ax telstar short shocks

i was wondering if someone here would know where i could get my hands on short shocks for my 92 tx5 , i have lovell super low springs in the car and lovell tells me they dont have super lows for telstars i'm in melb

jak_a is offline   Reply With Quote Multi-Quote with this Post
Old 20-05-2007, 07:12 AM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

not agood idea the telstars are already quite low
you may have to chase a few mod shops to find an alternative
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 20-05-2007, 10:20 AM   #3
jak_a
Starter Motor
 
Join Date: May 2007
Posts: 14
Default

so installing stantard shockers will be ok in my car?
jak_a is offline   Reply With Quote Multi-Quote with this Post
Old 20-05-2007, 08:09 PM   #4
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

most definatly std shocks wont get you defected
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 21-05-2007, 10:20 AM   #5
jak_a
Starter Motor
 
Join Date: May 2007
Posts: 14
Default

thanks for advice
jak_a is offline   Reply With Quote Multi-Quote with this Post
Old 28-05-2007, 10:11 AM   #6
Selfmindead
Starter Motor
 
Join Date: Nov 2006
Posts: 8
Default

If the springs are not captured when the car is wheel is off the ground then you will need shorter shocks, but most lowering springs are made to work with the factory shocks & be captured.
Selfmindead is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2007, 03:38 PM   #7
jak_a
Starter Motor
 
Join Date: May 2007
Posts: 14
Default installing front shocks

could anyone tell me how hard it is to remove original ax tx5 front struts and replacing them with gabriel shockers and what tools i would need , thanks in advance
jak_a is offline   Reply With Quote Multi-Quote with this Post
Old 25-06-2007, 07:21 PM   #8
hitork
Injected
 
hitork's Avatar
 
Join Date: Apr 2007
Location: Melbourne
Posts: 67
Default

My only advice would b watch out when removing the spring, if you slip and the spring jumps out you could be in some major pain. Most wheel places like bob jane will change the struts/springs over for about $60 and they have devices which lessen the danger and work that is needed.
hitork is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 01:17 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL