what mods can i do to my EF

[BYRNSIE.XR6T.]

just bought a 1996 EF XR6 TICKFORD FALCON, just wondering wat mods can i do peformance wise to enhance it, the only thing is i cant turbo it or supercharge it. what can i do?. it has already been chipped and the heads have been milled. i have 15k ready for the motor but i need ford intelegence advise.

[MeLLy]

Take the 15 k and put it in the bank till you can turbo or supercharge it *** wasting 15k on an n/a build

[CaRtZ]

ur imagination is ur only limit! just remember that ur lucky to make back half of wot u spend on any car

[BYRNSIE.XR6T.]

Take the 15 k and put it in the bank till you can turbo or supercharge it *** wasting 15k on an n/a build

melly i need car advice not parenting advice

[gthofan]

well it has to be asked, Is the car for the street or track?

[EF Futura 07]

theres no need to spend 15k. get headers/exhaust,cam,shift kit(if auto),DIY CAI!
also if its an auto get some 3.7's or 3.9's if you still want to obtain economy if not get 4.11's and a 2500-3000 hi stall and you should see 14 seconds!!! even for a turbo you wouldnt need to spend 15k(unless you want something stupid like 400rwkw) :

[snypereb]

Headers
Exhaust
10mm Leads
K&N Filter
Better Spark Plugs
3.9 Diff Gears

All depends, go turbo though!

[TICKFORD_XR6]

if you dont mind me asking.. why cant you go turbo?
it would be the best option

Damon

[Gohan]

depends if u want show and GO!

[EF_II_XR6]

snypereb is exactly correct! Ive got a 1995 series 2 EF XR6 also, so far ive put a air intake (took the pod off) k&n panel filter and 2.5' exhaust thats it, need new tyres so im tight on cash at the moment. But yeah Pacemaker Headers, 2.5" custom Exhaust system, 10mm Top gun leads, K&N panel filter, NGk Spark Plugs that would make huge difference man. Thats what im saving up for next anyways.

[snypereb]

Originally Posted by EF_II_XR6

snypereb is exactly correct! Ive got a 1995 series 2 EF XR6 also, so far ive put a air intake (took the pod off) k&n panel filter and 2.5' exhaust thats it, need new tyres so im tight on cash at the moment. But yeah Pacemaker Headers, 2.5" custom Exhaust system, 10mm Top gun leads, K&N panel filter, NGk Spark Plugs that would make huge difference man. Thats what im saving up for next anyways.

Think I saw you last wednesday was it you turning off at narre warren?

All comes down to how much you have to spend and if you want fuel economy and how fast do you wanna go.

[Loq]

if you want NA performance sell the car and get a BA XR6. Should have a bit left over for standard filter, tyres, exhaust.

It won't get you 12s, but'll be easier than to pump $15k of non-turbo mods into an EF.

[castek]

be different. stroke it, twin TB, headers, exhaust, manual, huge cam, a squirt of nitrous to get you off the line fast. get a 9" for reliability

[EF_II_XR6]

Think I saw you last wednesday was it you turning off at narre warren?

Where you in adelaide at the time mate? cause your from vic :P haha

[frd_crzer]

well if you want to u can achieve 170rwkw n/a malual port polish acl rings 1673 wade cam crow valves crow valve springs get it tunned etc. there is a number of things that you can do and then when u ready to turbo then you will achieve wat u want mate.

[2tufracing]

15k on a n/a 6? thats a joke right? right?

[raised by monkeys]

dude, 15k... what CANT you do. i'd go basics first. exhaust/headers/air intake/common pimp looks (lowering/rims) go bigger brakes or just c/slotted and drilled. 15k man... the list goes on... but not forced induction, that sux.

[Obriza]

ill second for the stroking... i was thinking of doing it to my EB. It will be awesome and very different.
9 inch with 3.9 gears
shift kit
3000rpm stall
stroke
custom headers and exhaust
air intake
big cam
If your not gonna go with turbo or supercharger because of legal issues, its very easy to hide them... get a supercharger with water injection so you don't have an intercooler hanging out. You cant tell with mine unless you really know what your looking for.

[yahoo189]

AS soon as you said 15k i almost cried with excitement for you. While it probably really annoying everyone saying this.. a BA is a sensible alternative. You can get them quite cheap nowdays.. If I was you go and have a look at the Brochures that Russelw has uploaded in the brochure section and see if you want to upgrade your car to look like a EL GT or buy and AU and make it look like a TE50.. in my opinion, spending that much that quickly on an xr6 may make you regret it down the track.... If you start with something like a BA, you already have a really good car to work with (NOT IN ANYWAY saying that E series are not good) Good Luck. If you do want to mod your car I think suspension uprgrade (stiffer shocks and springs) and a wade cam should be right up your alley. Theres. Getting the induction sorted might also help you with your throttle response. A good exhaust system (Redback is cheap and good value) would be well worth your while.