|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-07-2007, 11:59 PM
|
#1 | ||
|
Starter Motor
Join Date: Mar 2005
Posts: 21
|
Hi,
I have an AR 84 Telstar, 2.0l Auto. I has done 53,000Kms and is in great condition apart from a few oil leaks due to the age of the car and not being driven much. Anyway, yesterday i noticed the temp gauge go hot all of a sudden, i pulled over and it was bone dry, i poured some water in and it appers to be coming out of a hose/clamp under the manifold on the passanger side. Any ideas what the hose/clamp could be? Thanks. PS: It blows black smoke (Fuel) and uses a heap of it, would FORD be able to give it a tune up? Thanks again. |
||
|
|
|
13-07-2007, 06:53 AM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
that would be a pipe joiner into the inlet manifold to cool the carby
if the hose has a split or the clamp failed you are lucky corrosion may be the problem black smoke-- the carby is running rich probably a choke issue /sure tune it To ford your money is as good as everyone elses
__________________
My car goes Brumm Brumm |
||
|
|
|
AR Telstar Water troubles?
Linear Mode
