Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 20-09-2007, 10:34 PM   #1
EL_Monty
Regular Member
 
EL_Monty's Avatar
 
Join Date: Jan 2005
Location: Earth
Posts: 115
Default KH Laser Water Pump Removal

could someone give me a quick rundown on what needs to be done to get at and remove the water pump on a 1990 laser 1.6

while i am mechanically minded ive never done one before


thanks
PM

EL_Monty is offline   Reply With Quote Multi-Quote with this Post
Old 21-09-2007, 06:00 AM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

if you can see the water pump
you undo the belt it runs off
undo the water pump holding bolts
the pump can be can be taken off with tools
clean the surfaces use a sealant and refit the pump and belt


if the pump is internal and runs off the timing belt thats much more complicated if it is a twin cam engine and needs a trained person
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 21-09-2007, 10:00 AM   #3
EL_Monty
Regular Member
 
EL_Monty's Avatar
 
Join Date: Jan 2005
Location: Earth
Posts: 115
Default

thanks dirty but i sorta knew that already......what i need to know is WHAT needs to be removed to replace waterpump ie: does the harmonic balancer need to come off etc etc
EL_Monty is offline   Reply With Quote Multi-Quote with this Post
Old 21-09-2007, 01:54 PM   #4
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

have to ask a laser owner not sure where the pump is located
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 21-09-2007, 02:18 PM   #5
JOSH
FF.Com.Au Hardcore
Donating Member1
 
JOSH's Avatar
 
Join Date: Mar 2005
Location: Hunter Valley
Posts: 3,184
Default

you have to remove all the belts, then take off the timing belt covers. line up the timing marks on the camshaft sprocket and the crankshft one aswell. loosen the 12mm bolt that runs through the tensionerand with a big screwdriver lever it back so there is no tension on the belt and then do it back up. remove the belt. now undo the 2x12mm bolts that the lower radiator hose goes onto. then undo the other 4 bolts. clean surface and make sure you use some sealant on the gasket. then put it all back together. make sure you get the timing belt back on right and make sure the crank and the cam hasn't moved. hope this helps.
JOSH is offline   Reply With Quote Multi-Quote with this Post
Old 21-09-2007, 10:48 PM   #6
EL_Monty
Regular Member
 
EL_Monty's Avatar
 
Join Date: Jan 2005
Location: Earth
Posts: 115
Default

thanks josh, with your input and my skinned knuckles im now a laser waterpump and timing belt specialist.......too easy when you get good advice and give it a go.

GH

ps , if car has ac removing the ac idler pulley and lower pulley helps as well
EL_Monty is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 01:19 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL