Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 24-09-2007, 11:13 PM   #91
twistedfirey
Starter Motor
 
Join Date: Jul 2006
Posts: 24
Default

I use 6.9... 2 more than diesel, dont count your saved pennys yet because you will have to travel around 200,000 km in your diesel just to break even on the extra cost of the tdci over petrol...but at least then you will save around $2.60 for every 100 kays you drive, woo hoo
twistedfirey is offline   Reply With Quote Multi-Quote with this Post
Old 24-09-2007, 11:59 PM   #92
celicara65
Starter Motor
 
celicara65's Avatar
 
Join Date: Aug 2007
Posts: 26
Default

I'm intrigued by a couple of comments about the engine being 'tight' while new. I've tried to refrain from driving too hard while the kms are low (ie upshifting at 3000 - 3500 instead of anything higher). Is that necessary, or was something more important for older less sophisticated engines? Does it really make that much difference to economy?
celicara65 is offline   Reply With Quote Multi-Quote with this Post
Old 25-09-2007, 12:26 AM   #93
BlackLS
yum
 
Join Date: Jan 2005
Posts: 1,417
Default

From what I've researched on running in - don't hold it on the rev limiter but run it fairly hard. You need the piston rings to bed in, and you do this with high cylinder pressure (non-bedded piston rings = lower cylinder pressure = less power)
The thing is though these engines might have been run in on a test bench at the Duratec factory.

Having said that, my car's been driven hard since I picked it up from the dealer and 90,000kms later its as quick as ever.
__________________
2005 LS Focus LX
Nov05 | Manual | Black Sapphire
250,000kms.

BlackLS is offline   Reply With Quote Multi-Quote with this Post
Old 25-09-2007, 04:27 PM   #94
scooby
Regular Member
 
Join Date: Feb 2007
Location: Sydney
Posts: 137
Default

The fact that fuel economy improves in the first few thousand km's in a new car makes me believe that engines are 'tight' when new. Mine was getting 12.8 when new (city driving), now at 2,800 kms on the clock, I get 10.8....hoping it gets lower..
scooby is offline   Reply With Quote Multi-Quote with this Post
Old 25-09-2007, 08:38 PM   #95
Martyvan
FF.Com.Au Hardcore
 
Martyvan's Avatar
 
Join Date: Jan 2005
Location: Brisbane North
Posts: 1,994
Default

My LR Zetec is returning 10.38 litres per 100km over 28,000km since i have owned it. During winter, driving for economy with the air con off, it returned low 9's in brisbane city driving.
Martyvan is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:59 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL