|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-02-2008, 08:22 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2008
Posts: 2
|
hello,
i am after some specs on the mk1 and mk2 escorts, i am looking for a list of the factory ride heights for the mk1 and mk2 escorts, ( the distance between the ground and the arch ). I have been given the specs ( rear-580mm and front-620mm ) at the local inspection center, but i believe they could be for a mk2, even with the factory height springs installed my car does not meet these measurements my car is a 1970 mk1 2 door hoping some might be able to help Thanks Sb |
||
|
|
|
04-02-2008, 08:31 PM
|
#2 | ||
|
Regular Member
Join Date: Dec 2005
Posts: 80
|
Sb, I couldn't tell you what factory specs are, but considering your Mk1 is over 30years old your springs would have sagged considerably. The only option to get as close to factory ride height would be to source aftermarket springs in std height.
__________________
Mk2 2dr 2lt Escort Mk2 2dr 1.6lt Escort - now a 2lt. |
||
|
|
|
|
04-02-2008, 08:37 PM
|
#3 | ||
|
Starter Motor
Join Date: Feb 2008
Posts: 2
|
yes sorry i forgot to mention i had the leaf springs reset and replaced the fronts with new k-macs
|
||
|
|
|
escort factory ride heights
Linear Mode
