|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-02-2008, 08:04 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2008
Posts: 1
|
why does the fuel injection fuse keep blowing and how can i fix this? drive down the road and it blows, put a new 1 in, get up the road and blows again
|
||
|
|
|
11-02-2008, 06:28 AM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
the fault would be in one of these
faulty sensor-air flow meter/Throttle position sensor/o2 sensor the injectors the engine management computer there should be a diagnostic plug where you might be able to get a diagnostic reading before the fuse blows or you have to unplug each sensor seperatly and test and connect each unit until the fuse blows then you have the answer .you can buy a dick smith or tandy LED tester or a volt meter a gregories repair manual is helpfull if you dont have one most libraries can help you there
__________________
My car goes Brumm Brumm |
||
|
|
|
1988 Ford Laser 1.6 Fuel Injected
Linear Mode
