|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
14-02-2008, 05:41 PM | #1 | ||
Starter Motor
Join Date: Feb 2008
Posts: 15
|
gday people
i own a mk11 cortina 2 door 220 1600 motor 4 speed and i would like to do a conversion cause im going to sloww i dont no much about much. are ther any cortina enthusiest that could lend some of ther wisdom wat would be some good combinations of diff gearbox n motor . at the moment i spent all my dosh on my car but i might save up and go all out thanks guy any ideas would be greatly appreciated |
||
14-02-2008, 08:41 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 580
|
first of all put up some pics of the car and its engine,
and if u want a cheap engine with more a fiar bit more power than the 1.6 get a 2.0 pinto from a cortina or rs2000 escort. the engine will bolt right in, and u can still use the existing gearbox + bellhousing. and there are a LOAD of aftermarket parts available for it heres an examply of a high powered 2.0 being built http://img526.imageshack.us/my.php?i...ture030ho3.jpg |
||
15-02-2008, 02:27 PM | #3 | ||
Starter Motor
Join Date: Feb 2008
Posts: 15
|
thanks dude pics are commen soon
how much do you rekkon that motor cost cheers mate |
||
15-02-2008, 04:10 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 580
|
i got mine for $250, but even tho it has good compression, the thermostat housing had 2 be replaced, and the carburetter is a bit tempermental.
a good running low ks should be about $500 ive seen good ones go for less, and i saw one on ebay not to long ago that was all modified and such that made 140 kw and sold for $300 but it was dirty as hell |
||
15-02-2008, 08:57 PM | #5 | ||
Starter Motor
Join Date: Feb 2008
Posts: 15
|
mad thats really affordable i think thats gunna be my choice of motor.
how far would say $1500 $2000 go on internal motor work like ccams ,better pistons,bore ,balance. maybe ill find won thats allready been done if im lucky. um do you no if ther are any stronger gear boxs that yous the same bell housing and go straight in or do you think the standard box will be strong enough also some won told me that the auto mk11 rs2000 escorts come out with really strong diffs is this true if so would it be a good idea. anyway im going to the park on sunday to take a few pics so hopfully sunday night ill have them on here thanks mate |
||
16-02-2008, 09:07 AM | #6 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 580
|
i wouldnt have a clue about the diffs. i not the panel van escorts have different ones.
the manual box in cortinas and escorts 4 speed, are all the same autos dunno. parts for the engine are the same price as any other, like $600 forged rods, $780 Pistons, $300 lumpy cams, $400 intake weber kit, $80 high pressue oil pump etc. little mods on the pinto give great improvement and big mods do even better! i just bought some used extractors for $50, after soem sandpaper $4, rust eater $16, and heat proof silver paint $15, they look like they were brand new, for the $400 they cost to get made. cheers |
||
16-02-2008, 07:31 PM | #7 | ||
Starter Motor
Join Date: Feb 2008
Posts: 15
|
and the nice tone you get priceless nice work on the extracters
have you got a mk1 or 2 and wat have you done to her cyalater |
||
17-02-2008, 08:55 PM | #8 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 580
|
i have an escort mk 2 1976. it had the 1600 in it and its going for the 2000cc
everythigns pretty much the same except the exterior and maybe suspension but the drivetrain is the same. and no matter how crap the stock gearbox may seem, it can handle the 2.0 trust me. lol |
||
17-02-2008, 08:56 PM | #9 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 580
|
when i said everythings the same, i mean everythigns the same to the cortina
|
||
18-02-2008, 04:15 PM | #10 | ||
Starter Motor
Join Date: Feb 2008
Posts: 15
|
thats good i wont have to do everything all at once even though id like to but i gota save my dosh
il have sum pics soon |
||
18-02-2008, 04:26 PM | #11 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 580
|
sounds great.. just wondering how old are you?
|
||
19-02-2008, 10:13 AM | #12 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 580
|
|
||
19-02-2008, 06:55 PM | #13 | ||
Regular Member
Join Date: Dec 2006
Posts: 36
|
I hear a 460 Big Block will fit quite nicely
|
||
20-02-2008, 06:43 PM | #14 | ||
Starter Motor
Join Date: Feb 2008
Posts: 15
|
um im 23 but i type like a 2 year old
id probably be sitting in the back seat with a 460 |
||
20-02-2008, 07:05 PM | #15 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 580
|
lol any engine can fit in any car if the work is done. but like i sed go for the 2.0
|
||
20-02-2008, 07:36 PM | #16 | ||
Starter Motor
Join Date: Feb 2008
Posts: 15
|
yea defenently the 2.0 im pretty sure thats gunna be choice
unless i win money some were ive been looking at duratech n zetech motors i read that a stock 2.3 litre out of a mondeo with extracters and air fillter will put out 200hp. have you heard of any one thats done a conversion like this maybe ill find a mondeo with its smahed in n get the moter cheap iduno |
||
20-02-2008, 08:09 PM | #17 | ||
Starter Motor
Join Date: Feb 2008
Posts: 15
|
[QUOTE=slo]yea defenently the 2.0 im pretty sure thats gunna be choice
unless i win money some were ive been looking at duratech n zetech motors i read that a stock 2.3 litre out of a mondeo with extracters and air fillter will put out 200hp. have you heard of any one thats done a conversion like this maybe ill find a mondeo with its *** smahed in n get the moter cheap iduno................ |
||
20-02-2008, 08:15 PM | #18 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 580
|
um the mondeo is a front wheel drive so that is a huge deal... and dont count on your chances of finding a cheap motor with big power.. it doesnt exist!! the car wreckers know more than you!.
best to look for engines, like the pinto, that have a load of parts available |
||
20-02-2008, 08:22 PM | #19 | ||
Starter Motor
Join Date: Feb 2008
Posts: 15
|
true true im just dreaming any way
|
||
20-02-2008, 09:00 PM | #20 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 580
|
lol well good luck
|
||