Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 21-02-2008, 04:59 PM   #1
McBain
McBain
 
Join Date: Apr 2007
Location: Canberra
Posts: 13
Default Escort wheels

Hey all,

I'll try to be brief, but I'm not very good at it...

I've recently bought a 1980 MKII escort, and only recently managed to get it registered...

There were quite a few things I wanted to do to the car before I moved onto 'cosmetics', but a problem ( more of a choice ) has presented itself...

When the car arrived (it was an interstate ebay purchase), it was wearing the spare on the rear. The original was in the boot and it was flat.

I pumped it up and took it to the mechanics, asking them to monitor it and replace it if it wasn't leaking.

They have since informed me that the original wheel was driven on while flat, and damage to the side wall has occoured. My mechanic has advised me that putting it back on wouldn't be preferable as I would be running the risk of a blow out.

As it's really only one tyre that needs replacing, I figure I have two options...

1) Try and track down one original tyre, as the other rear is at about 60 - 70%

2) Or, I could buy a completely new set of rears...

Doesn't sound like much of a problem yet does it?

Thing is, I hate wasting money, and I hate doing things twice. I had planned to upgrade to a set of taller, wider mags in the future, (hopefully by the end of the year), but that would mean then throwing out the tyre I bought at the start of the year (now).

Can anyone make any suggestions as to what I'd be looking for when contemplating buying a set of wheels?

Also, do you know what 108 ( four stud x 108 ) is refering too?

And any idea what PCD is?

Any help, or suggestions would be greatly appreciated....

Dan

__________________
Mendoza!
McBain is offline   Reply With Quote Multi-Quote with this Post
Old 21-02-2008, 05:27 PM   #2
naughts
Hmmmmm Mulberry....
 
naughts's Avatar
 
Join Date: May 2005
Location: Mornington Peninsula
Posts: 1,438
Default

108 is the PCD
naughts is offline   Reply With Quote Multi-Quote with this Post
Old 21-02-2008, 09:02 PM   #3
McBain
McBain
 
Join Date: Apr 2007
Location: Canberra
Posts: 13
Default

Yeah, your right.

Just saw this answer to a question on ebay;

Q: can you tell me the pcd are they 4 x 108? whats the offset thanks 19-Feb-08

A: Yes PCD is 4 x 108mm, Ofset measures, rear of flange to inner rim lip 90mm, rear of flange to outer rim lip 110mm, hope this helps. Cheers Danny

Cheers!
Dan
__________________
Mendoza!

Last edited by McBain; 21-02-2008 at 09:16 PM. Reason: edit
McBain is offline   Reply With Quote Multi-Quote with this Post
Old 22-02-2008, 11:46 AM   #4
outback_ute
Ute Forum Moderator
Contributing Member
 
outback_ute's Avatar
 
Join Date: Dec 2004
Location: Melb
Posts: 7,227
Default

I had a similar situation, I had to drive on a flat to get to a safe place to change it. I replaced the tyre, I didn't think it was worth taking the risk.

Does the spare match the other wheels? Another thing to be wary of is very old tyres, the rubber deteriorates and is liable to blow out. Ironically spare tyres are probably worse in this regard than tyres that are used, for the same age.

I would buy one tyre (if you can't keep using the spare), might be $80 or so but a lot better than having an accident due to a blowout. Otherwise bring forward your wheel upgrade plan!

Have a look in the tyre & wheel tech area in the forums for a rundown on all the different measurements and terminology if you are not clear on what they mean.
outback_ute is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 05:55 PM   #5
EskyCosworth
RS2000 COSWORTH
 
Join Date: Jul 2006
Location: Sydney
Posts: 58
Default

P.C.D is Pitch Circle Diameter. The 4 studs fit on a circle of 108mm.

For an Escort the track is 12mm offset from the centre of the rim. For instance my RS2000 has 16x7 12P wheels. The 12P is the offset from the centre of the 7inch wide wheel.

Buy matching tyres, buy decent ones if you value your life and also enjoy driving a car that handles...
EskyCosworth is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:29 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL