Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > The Bar

The Bar For non Automotive Related Chat

Reply
 
Thread Tools Display Modes
Old 26-04-2008, 02:17 PM   #1
Keepleft
Mot Adv-NSW
 
Keepleft's Avatar
 
Join Date: Jun 2005
Location: Lake Macquarie, NSW
Posts: 2,153
Default Future of 400Mhz - UHF CB - planning underway.

Knowing that some here use UHF CB on the road, those of you technical might find this of interest.

400Mhz, future of UHF CB et al
Discussion:-
http://www.austech.info/communicatio...html#post40513

See Page 36 of the Pdf download re 12.5Khz channel spacing, see link within.
http://www.acma.gov.au/WEB/STANDARD/pc=PC_311117

The closing date for submissions is 18 July 2008.

J.

__________________
ORDER FORD AUSTRALIA PART NO: AM6U7J19G329AA. This is a European-UN/AS3790B Spec safety-warning triangle used to give advanced warning to approaching traffic of a vehicle breakdown, or crash scene (to prevent secondary). Stow in the boot area. See your Ford dealer for this $35.95 safety item & when you buy a new Ford, please insist on it! See Page 83, part 4.4.1 http://www.transport.wa.gov.au/media...eSafePart4.pdf
Keepleft is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2008, 07:20 PM   #2
flappist
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 12,077
Default

In answer to your questions over there:

1) 12.5Khz is not a problem provided there is an offset, maybe 5 or the defacto standard 9Mhz for TTR activity. The current 750Khz offset makes it difficult and expensive to maintain isolation.
2) Analog FM should not be replaced by digital as it will reduce range, make incumbent equipment and systems redundant and inflate CPE prices.
3) 25w over 5w is only 7db but increases the RF current to a level where users who misoperate their equipment could cause injury or death. The increase in range is insignificant. Also on existing TTR it would require another 7db of isolation which would
result in at least 1.5-2db insertion loss.

But of course it is the government so it will be a clusterflug........
flappist is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 12:08 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL