|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
31-05-2008, 10:04 PM
|
#1 | ||
|
Regular Member
Join Date: Apr 2005
Posts: 284
|
This morning started off with a little rain, backing out the driveway I felt water dripping on my foot. After some investigating I have found that the pedel box has cracked the top of the firewall.
When depressing the brake the whole area flexes, so I can see why it happened, it is a really poor design. I have searched and can see other people have had the same problem, but cant see what people have done to fix it. I am thinking I will have to take the dash out, drill out the cracked spot weld and weld some plate in there to stregnthen the whole area. I may as well do the clutch at the same time (its not cracked yet tho) Has anyone had to do this? and pics on the fix? any tips? Last edited by jeffb; 19-06-2012 at 08:19 PM. |
||
|
|
|
31-05-2008, 10:23 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 2,256
|
Mine was just a hole in the exact same place, the blasted crappy spot weld, and all i did to fix it was to use some urethane to seal it.
|
||
|
|
|
|
01-06-2008, 07:30 AM
|
#3 | ||
|
Regular Member
Join Date: Apr 2005
Posts: 284
|
I have done that just to stop the water getting in, but it needs to be fixed properly as it will only get worse over time.
|
||
|
|
|
|
01-06-2008, 08:32 AM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2005
Location: Airlie Beach
Posts: 539
|
I used 2 part " stronger than metal " epoxy for mine. The epoxy has metal fillings or something in it. Smear it on and let it dry. worked a treat, haven't had a leak again.
__________________
Red bull gives you wings?  : nahhh.... we got our wings from TICKFORD
|
||
|
|
|
AU XR Cracked firewall above pedal box
Linear Mode
