|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
21-06-2008, 04:36 PM
|
#1 | ||
|
Regular Member
Join Date: Nov 2005
Location: Brissy!
Posts: 472
|
k so that little doobywacka or a container that has the brake fluid in, mines all cracked and corroding and has a hole in it the size of a small ant
are they easy to replace or should i take it to a brake specialist? and if air get into it is that a bad thing? iv taped it up lol
__________________
i won. |
||
|
|
|
21-06-2008, 05:01 PM
|
#2 | ||
|
Broken
Join Date: Dec 2005
Posts: 7,845
|
The resovoir is pretty easy to replace.
Air and brake systems is not good. Tape won't cut it, and from my experience, brakes are not something to be dodgey with..... Not to be rude, but if you were unsure on the answere to your 'air' question, you should take it to a mechanic to fix. good luck
__________________
The Scud GT 11.4 @ 128, 1.88 60ft. |
||
|
|
|
|
21-06-2008, 05:05 PM
|
#3 | ||
|
Regular Member
Join Date: Nov 2005
Location: Brissy!
Posts: 472
|
what symtoms would i notice if air did get into brakes? cus this hole has been their for a while.... and i been driving fine. :S
im gonna call a brake specialist on monday to see what he can do for me!
__________________
i won. |
||
|
|
|
|
21-06-2008, 05:09 PM
|
#4 | ||
|
Broken
Join Date: Dec 2005
Posts: 7,845
|
Spongy / soft pedal, or depending on the amount of air in the system, no brakes at all..............
The air is also pretty easy to get out of the brake system, you would just need to bleed the lines...... eack brake caliper has a bleed nipple..... but, you MUST get the resovoir replaced first.
__________________
The Scud GT 11.4 @ 128, 1.88 60ft. |
||
|
|
|
|
21-06-2008, 05:37 PM
|
#5 | ||
|
Regular Member
Join Date: Nov 2005
Location: Brissy!
Posts: 472
|
yea, not really keen on taking the wheels off and bleeding. so ill take it to some 1
__________________
i won. |
||
|
|
|
brake fluid
Linear Mode
