|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-08-2008, 05:57 PM
|
#1 | ||
|
Rally hard
Join Date: Aug 2008
Posts: 3
|
Hopefully someone can give a bit of advice. Have a turbo 4wd with clutch slippage. Took off from pub t other day felt a slight pop in clutch pedal then severe clutch slip. Have removed clutch and found crack in the clutch plate where one of the springs r housed.looks fairly recent.Could this b the cause of the slipping. Also got a prob with the car cutting out on corners.Runs pretty well
otherwise except can only run shell fuel. the cutout happens more on left than right hand corners. Any ideas cos its got me stumped cheers Last edited by TX3; 05-08-2008 at 06:04 PM. |
||
|
|
|
11-08-2008, 08:14 PM
|
#2 | ||
|
Rally hard
Join Date: Aug 2008
Posts: 3
|
turns out its the centre diff so jf anyone out there thats got a copy of the tx3 supplement so that i can attempt a rebuild it would be much appreciated
|
||
|
|
|
tx3 4wd turbo clutch slip & cut out prob
Linear Mode
