|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
20-09-2008, 04:24 PM | #1 | ||
GrEeN MAChInE
Join Date: May 2005
Location: Melbourne
Posts: 13
|
just lookin at gettin the old mans au falcon on the road asap. he gave me lift to pick my car up from the transmission joint yesterday n his tranny shat itself on the way home :ticking: so i got an old eb transmission sittin around n was wonderin if i could bolt the au bellhousing on to it n chuck it in the au? anyone got any idea?
just quickly also ive blown a few auto's but never seen one spit all its oil out n start slippin, other than that no problem? any ideas? |
||
20-09-2008, 05:54 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: Sunbury, vic.
Posts: 3,110
|
yes you can, but you'll have to swap over au inhibitor switch and gear position sensor, which is easy 2 bolts from memory.
__________________
T058 TS50 - 302 AFR165, Victor 5.0, Custom Cam, tuned by me, 245.6rwkw 329rwhp at 6800rpm. |
||
20-09-2008, 05:55 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: Sunbury, vic.
Posts: 3,110
|
oh and its blown up cause its over heated and cavitated the oil/boiled. you may fined filling it with oil again, it might be ok. Possible blocked oil cooler.
__________________
T058 TS50 - 302 AFR165, Victor 5.0, Custom Cam, tuned by me, 245.6rwkw 329rwhp at 6800rpm. |
||
20-09-2008, 05:59 PM | #4 | ||||
Back to Le Frenchy
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
|
Quote:
__________________
Quote:
07 Renault Sport Megane F1 Team R26 #1397
|
||||
20-09-2008, 08:43 PM | #5 | ||
Turbo Falcon Fiend
Join Date: May 2005
Location: Far West NSW
Posts: 3,213
|
Yeah I have an EB Trans in my AU. Just make sure you use a new trans cooler the old one could be full of bits and crap. Its not hard to swap - just make sure you use the AU bellousing - should be sweet.
__________________
Just a few. |
||
21-09-2008, 08:14 PM | #6 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
|
swap the parts listed above and you will be sweet mate!
done it with a previous box in mine with no problems
__________________
On The Street Feature Winner Performance Ford Mag See my car at:-www.aufalcon.com/blackers10 |
||