Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 23-09-2008, 04:32 PM   #1
simonr23
Regular Member
 
Join Date: Dec 2006
Location: Adelaide
Posts: 365
Default kh laser aircon problem

my gf has just bought a kh 1.6 laser. the aircon 'system' works it seems. i can hear the compressor actuate, the engine gets a bit more load on it and the a/c engine fan comes on. the problem is that there is no change in temperature, nor any de-humidifing. could it just be that it's out of gas? if so, i'd assume it's all leaked out for there to be no "aircon" effect happening. where should i be checking for leaks? any cheap things i can do to save a wasted regas?
thanks heaps.

simonr23 is offline   Reply With Quote Multi-Quote with this Post
Old 23-09-2008, 09:08 PM   #2
fairmont1998
FF.Com.Au Hardcore
 
fairmont1998's Avatar
 
Join Date: Dec 2004
Location: Adelaide
Posts: 3,103
Default

Very possible that its low refrigerant that is the problem.
Best to take it to a mechanic to get that fixed, you can't just top them up yourself anymore.
If you are keen to look for a leak, start at all the pipe joins and use a soap solution. Wipe it over the joins and look for bubbles. (If the system is completely empty you won't see bubbles remember)
__________________
Current Rides:

2012 KK Jeep Cherokee Limited CRD - Still going strong
2019 MG ZS Essence
1988 RD Mitsubishi Colt GL - 59kW of Fury
2022 Kia Stinger GT
fairmont1998 is offline   Reply With Quote Multi-Quote with this Post
Old 02-10-2008, 08:32 PM   #3
Kariharnett
Lil Henry
 
Kariharnett's Avatar
 
Join Date: Dec 2007
Location: Townsville Nth Queensland
Posts: 168
Default

most places put a dye in the system free of charge to find the leak, then they will charge you when they fix it and re gass it. but be carefull our mazda had die in the coolant to find a leak a long time ago and when they checked the a/c gas they found die all over the engine bay took them 3 weeks to figure out that it was coolant they could see not ac gas.
Kariharnett is offline   Reply With Quote Multi-Quote with this Post
Old 03-10-2008, 04:40 PM   #4
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

it could be the TX valve not working ( regulates the gas flow inside the car )

look for bubbles in the sight glass of the dryer (cylinder in engine bay )
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 09:45 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL