|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
27-10-2008, 06:57 PM
|
#1 | ||
|
Tyre Shredn
Join Date: May 2007
Location: hillside
Posts: 162
|
how do you get the drivers side door off. interior trim
the central locking in my door buzzez and will only work if use with the key or by hand central locking only works on the other doors. |
||
|
|
|
27-10-2008, 10:46 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Perth, South
Posts: 3,064
|
power windows or not?
|
||
|
|
|
|
27-10-2008, 11:19 PM
|
#3 | |||
|
XR6T 400kw(well one day!)
Join Date: Dec 2005
Location: Toodyay W.A.
Posts: 1,008
|
Quote:
Remove the screws around the outside of the trim. There is also a bolt holding the interior door handle in. This is usually covered by a small plastic tab. If memory serves me right you will need a star shaped bit to undo it. The arm rest will also have two similar screws. Put a rag over your door knob and use pliers to yank it straight up. If you have a manual window winder, you will also see a screw holding that on too. You should be right to pull the trim off. It will be held by plastic clips, so give it a good firm pull.
__________________
If it Vibrates, rattles, squeaks or knocks - then it must be a Territory |
|||
|
|
|
|
27-10-2008, 11:28 PM
|
#4 | ||
|
Now Fordless
Join Date: Aug 2005
Location: Fremantle, WA
Posts: 3,611
|
I took my passenger door off the other day. A couple of screws around the outside which are visible. 2 10mm bolts one behind the inner handle surround and the other behind that little round cover. I think there is a screw under the window switch too.
Thats for a power window AU. |
||
|
|
|
|
28-10-2008, 01:12 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: Sunbury, vic.
Posts: 3,110
|
yes there is a screw under the power window switch.
__________________
T058 TS50 - 302 AFR165, Victor 5.0, Custom Cam, tuned by me, 245.6rwkw 329rwhp at 6800rpm. |
||
|
|
|
|
28-10-2008, 05:00 PM
|
#6 | ||
|
Tyre Shredn
Join Date: May 2007
Location: hillside
Posts: 162
|
yer ive done all that but it still wont come off thats why i dont know wats going on.
im getting ****ed off im gonna wreak the door in sec. it feels like its stuck dead centre of the door?????????????? |
||
|
|
|
|
28-10-2008, 07:38 PM
|
#7 | ||
|
Tyre Shredn
Join Date: May 2007
Location: hillside
Posts: 162
|
k disregard that i got it off
now how do i get the actuator out ive had a quick look and i cant see how to get it off. i dont want to take off any un necessary parts. |
||
|
|
|
|
28-10-2008, 07:41 PM
|
#8 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Perth, South
Posts: 3,064
|
the 3 screws that hold the catch in need to be taken out, then you should be able to see how the rods disconnect. the whole thing comes out as one piece
|
||
|
|
|
|
28-10-2008, 08:27 PM
|
#9 | ||
|
XR6T 400kw(well one day!)
Join Date: Dec 2005
Location: Toodyay W.A.
Posts: 1,008
|
Should be a case of just undoing the 3 screws holding the actuator in.
All the rods are just held by clips. Just gently pull them out. Also undo the electrical clip. As Bodes-sh said, it all comes out in one unit. There is a complete procedure and photos of how to fix these actuators in the technical section - its a very common problem. Unfortunately i don't know how to post links.  :
__________________
If it Vibrates, rattles, squeaks or knocks - then it must be a Territory |
||
|
|
|
|
29-10-2008, 03:51 PM
|
#10 | ||
|
Tyre Shredn
Join Date: May 2007
Location: hillside
Posts: 162
|
cool thanks ill try and find the page.
|
||
|
|
|
I Need Help
Linear Mode
