Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 06-03-2009, 11:36 PM   #1
JMO
FF.Com.Au Hardcore
 
JMO's Avatar
 
Join Date: Sep 2007
Posts: 717
Default Is this a sign of a leaking head gasket?

The patches you can see were under the bbm. There aren't any other signs of leakage (dropping coolant, oil etc). They were damp to the touch but didn't have any odour as far as I could tell. What do you guys think?

The moist patches are the darker areas on the rusted block.



Don't pay any attention to the dribbly bit you see to the right, that was my doing.



I've been trying to track down the cause of my rough idle and tried almost everything. Last on my list was the fuel sock. Now this has me worried :(

JMO is offline   Reply With Quote Multi-Quote with this Post
Old 09-03-2009, 01:00 AM   #2
EvilChief
Boost Addict
 
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
Default

looks and soubds like a shitty intake manifold gasket. were the bolts tighst when u removed the BBM. what was the condition of gasket like. not uncommon for fuel/carbo to sweat through when teh gasket is not tight enough, which also causes rough idle, shitty fuel economy etc
__________________
N12 Pulsar - sold
Gen1 Liberty Turbo - sold
VP Commodore Turbo - sold
LN65 Hilux Turbo - sold
EL31 Corolla Turbo - sold
Ford AU Ute Turbo - sold
Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build)
Ford BA XR6T Ute - daily driver
Ford FG XR6T Sedan - cruiser

do you see a general trend? I DO

Can't live with it, can't live without it!
EvilChief is offline   Reply With Quote Multi-Quote with this Post
Old 09-03-2009, 01:58 AM   #3
JMO
FF.Com.Au Hardcore
 
JMO's Avatar
 
Join Date: Sep 2007
Posts: 717
Default

It was pretty clean under the gasket. The residue is part of what was left while I was cleaning the inside out. The bolts had a little give in them, so I didn't tighten them a hard as I could, Just tight enough so they didn't move any more with the wring spanner unless I put a fair bit of effort into it. I have a habit of shearing bolts by being over cautious with the tightening. Hopefully it is as tight as it should be.
JMO is offline   Reply With Quote Multi-Quote with this Post
Old 10-03-2009, 10:41 PM   #4
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

It looks like a rocker cover leak.Look at the oil stain coming down the side of the port...
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 11-03-2009, 10:06 AM   #5
JMO
FF.Com.Au Hardcore
 
JMO's Avatar
 
Join Date: Sep 2007
Posts: 717
Default



The bit circled in red is just part of what I was cleaning out of the port itself. There isn't anything leaking from the rocker cover. The moist patch circled in blue is what I'm worried about. It was moist to the touch but had no odour as far as I could tell. It also looks like it is coming from where the head gasket is. There aren't any pipes close enough to where it is to make a moist patch.
JMO is offline   Reply With Quote Multi-Quote with this Post
Old 11-03-2009, 07:59 PM   #6
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by JMO


The bit circled in red is just part of what I was cleaning out of the port itself. There isn't anything leaking from the rocker cover. The moist patch circled in blue is what I'm worried about. It was moist to the touch but had no odour as far as I could tell. It also looks like it is coming from where the head gasket is. There aren't any pipes close enough to where it is to make a moist patch.
Look above the blue circle.it seems like fuel stain leading straight to that area from the head.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 11-03-2009, 08:41 PM   #7
JMO
FF.Com.Au Hardcore
 
JMO's Avatar
 
Join Date: Sep 2007
Posts: 717
Default

If by head you mean rocker cover, how does fuel leak from there? As I said it doesn't appear as though anything is leaking from the rocker.
JMO is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 12:16 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL