|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
24-03-2009, 09:59 AM
|
#1 | ||
|
Starter Motor
Join Date: Mar 2009
Posts: 2
|
i have a 1993 ford telstar tx5 ghia, It has the 2.5 v6 in it its 3 speed auto
and everytime like you come up to a red light to fast and you hit the brake, It stalls it will just cut out accessorie lights will come on you will have to put it in park or neutral and restart, what could be causing this problem the engine has good power does'nt lack transmission isnt sluggish or anything its all good but if you hit the brake to hard it will stall. |
||
|
|
|
24-03-2009, 09:13 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Canberra Region
Posts: 8,994
|
Sounds like a vacuum issue perhaps? Maybe a brake booster leak?
Tried a heavy stop without using the foot brake? Use the trans to engine brake and also use the handbrake PS Its actually a four speed auto
__________________
2016 FGX XR8 Sprint, 6speed manual, Kinetic Blue #170 2004 BA wagon RTV project. 1998 EL XR8, Auto, Hot Chilli Red 1993 ED XR6, 5speed, Polynesian Green. 1 of 329. Retired 1968 XT Falcon 500 wagon, 3 on the tree, 3.6L. Patina project. |
||
|
|
|
|
24-03-2009, 09:24 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Canberra Region
Posts: 8,994
|
You could also try heavy foot braking in [N] with you holding the revs at 1000rpm, I doubt it would stall as the throttle will be open allowing air in.
How does it idle normally? Could also be an Idle Speed controller issue I guess.
__________________
2016 FGX XR8 Sprint, 6speed manual, Kinetic Blue #170 2004 BA wagon RTV project. 1998 EL XR8, Auto, Hot Chilli Red 1993 ED XR6, 5speed, Polynesian Green. 1 of 329. Retired 1968 XT Falcon 500 wagon, 3 on the tree, 3.6L. Patina project. |
||
|
|
|
|
25-03-2009, 12:31 AM
|
#4 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
could be a faulty torque converter
needs a stall test done on it what about an automatic service .....needs one every year
__________________
My car goes Brumm Brumm |
||
|
|
|
|
25-03-2009, 12:39 AM
|
#5 | ||
|
Starter Motor
Join Date: Mar 2009
Posts: 2
|
Your problem could be caused by a couple of things.
1...Base idle speed adjusted too low. 2...Throttle position sensor incorrectly adjusted or worn. 3...Idle step motor sticky or worn. Check owners manual for recomended idle speed. The others need to be checked by a Mechanic. One last thing.....Make certain the motor is not over filled with oil. Overfilled on heavy braking would cause oil surge and stalling. Hope this is a help......... |
||
|
|
|
|
26-03-2009, 09:53 PM
|
#6 | ||
|
Starter Motor
Join Date: Mar 2009
Posts: 2
|
thanks guys ill take all this in
|
||
|
|
|
Ford Telstar question
Linear Mode
