|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-05-2009, 02:36 PM
|
#1 | ||
|
Regular Member
Join Date: Jan 2005
Location: Earth
Posts: 115
|
got a laser here with a bad clutch (no clutch) , it has been slowly getting closer to the floor and now there is nothing, its a fluid issue the clutch itself is fine.
ive tried bleeding the clutch system but i don't seem to be getting any pressure down at the slave cylinder. my question is what is the name of the doohickey on the firewall that the clutch pedal pushes on via the connecting rod? i assume that's where the pressure comes from. whatever its called is it serviceable ie: kits are available or is it a throw away and grab a new one item. GH |
||
|
|
|
09-05-2009, 03:29 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Perth, South
Posts: 3,064
|
i believe you are talking about the master cylinder? yes, there should be rebuild kits available for them. i would also get a kit for the slave cylinder too, and do them both at the same time, at least that way you will have all new seals and fluid in the clutch system
|
||
|
|
|
91 laser clutch issue
Linear Mode
