|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
15-08-2005, 06:14 PM
|
#1 | ||
|
Solution Was Boost 4?, 6 & 8
Join Date: Dec 2004
Location: Melbourne
Posts: 23,624
  
|
Guy's we are going to play with some Throttle Body's, need some info.
Series 1, 2 & 3 AU-6 are they all the same in fitment and what size is the standard bore on these T/B's. 64mm?
__________________
[SIGPIC][/SIGPIC]
AUTOTECH TUNED EDELEBROCK CHARGED 2017 GT Mustang Plenty of RWKW |
||
|
|
|
15-08-2005, 06:21 PM
|
#2 | ||
|
they call me Tibbo
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
|
EF-AU are all the same iirc
__________________
|
||
|
|
|
|
15-08-2005, 06:28 PM
|
#3 | ||
|
Miami Pilot
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
|
No difference in AU 1 to 3, Forte to XR - Engine hardware is all the same. Only differences were ECU and exhaust. You should be able to get the measurement off Hamo's car, but 64/65mm sounds about right.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
|
|
|
|
15-08-2005, 08:24 PM
|
#4 | |||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Posts: 1,381
|
I dont think they changed from EF through the AU's. I had an AU XR TB and it was the same as my EF Gli.
__________________
Quote:
|
|||
|
|
|
|
15-08-2005, 08:49 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne, Victoria
Posts: 2,434
|
Factory throttle bodies are 63.4mm, i believe.
__________________
AUIII Falcon Forte, with SIX Appeal |
||
|
|
|
|
15-08-2005, 08:59 PM
|
#6 | ||
|
Solution Was Boost 4?, 6 & 8
Join Date: Dec 2004
Location: Melbourne
Posts: 23,624
|
Gentlemen thanks for the quick reply's.
 :
__________________
[SIGPIC][/SIGPIC]
AUTOTECH TUNED EDELEBROCK CHARGED 2017 GT Mustang Plenty of RWKW |
||
|
|
|
|
17-08-2005, 11:22 PM
|
#7 | ||
|
Moderator
  
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
|
EGAS has a restrictor on it .... down to 50mm from memory
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||
|
|
|
AU-6 Throttle Body's
Linear Mode
