Finally My Fog Lights!!

[Timmeh]

We did a full tutorial on this, as Teki said, at www.eurofordclub.com/fiestafogmod.html

You don't need to cut the bar, you buy new surrounds when you buy the fog lights, and the fogs screw thru them into the bar.

Tim

Originally Posted by Timmeh

We did a full tutorial on this, as Teki said, at www.eurofordclub.com/fiestafogmod.html

You don't need to cut the bar, you buy new surrounds when you buy the fog lights, and the fogs screw thru them into the bar.

Tim

Finally found the guide, but seems the UK LXs don't have body coloured bumpers and so the grills don't unclip but are actually moulded to the bumper.

[FlaminFiesta]

i dont know how it is operated, but its where the rear reverse light would be on one side on the fiesta and its used as a warning to rear cars , thats why its ultra bright

also its on both sides normally but in australia the standards say u have a reverse white light to indicate reverse so they change it to one rear fog light and one reverse light, where in europe when reversing they flash teh hazard lights lol

also its on both sides normally but in australia the standards say u have a reverse white light to indicate reverse so they change it to one rear fog light and one reverse light, where in europe when reversing they flash teh hazard lights lol

We have one white reverse and one rear red fog light too.

[Danny]

Welcome to the forums MV54 I'm Danny_Mk6 on the UKFN. Now i understand why its difficult for you to fit foggies cuz in the UK the LX is a totally different spec level to our LX here. So our eurofordclub tute probably wont help you much.

-Dan

Originally Posted by Danny

Welcome to the forums MV54 I'm Danny_Mk6 on the UKFN. Now i understand why its difficult for you to fit foggies cuz in the UK the LX is a totally different spec level to our LX here. So our eurofordclub tute probably wont help you much.

-Dan

Well the switch guide was pretty useful... but yeh the LX is different over here.

Cheers for the time though.