Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > The Bar

The Bar For non Automotive Related Chat

Reply
 
Thread Tools Display Modes
Old 25-03-2010, 09:36 PM   #1
Road_Warrior
Pity the fool
 
Road_Warrior's Avatar
 
Join Date: Jan 2007
Location: Wait Awhile
Posts: 8,997
Question Repairing water damaged power tools?

Perth's Monday afternoon uberstorm (TM) punished my backyard as well as flooded my shed. The mess in the back yard I couldn't care less about; I can clean it up. I am rather dirty (pun, hurr hurr) about some of my electrical tools that got inundated in my shed. Like my little arc welder that was still brand new:



I pulled the cover off it to see how much it got flooded; as you can see by the waterline, it was pretty much drowned.



Question is, can it be saved, or is it a bin job? I thought if I cleaned all the crap out and dried it right out it might be ok but...I'm not sure if I should or if it is worth it.

__________________
Fords I own or have owned:

1970 XW Falcon GT replica | 1970 XW Falcon | 1971 XY Fairmont | 1973 ZG Fairlane | 1986 XF Falcon panel van | 1987 XFII Falcon S-Pack | 1988 XF Falcon GLS ute | 1993 EBII Fairmont V8 | 1996 XG Falcon ute | 2000 AU Falcon wagon | 2004 BA Falcon XT | 2012 SZ Territory Titanium AWD

Proud to buy Australian and support Ford Australia through thick and thin
Road_Warrior is offline   Reply With Quote Multi-Quote with this Post
Old 25-03-2010, 09:51 PM   #2
kenz
BOSS Pilot
 
kenz's Avatar
 
Join Date: Sep 2005
Location: on the loud pedal! Brisbane
Posts: 6,020
Default

It'd be worth a try. One of the guys at work dropped a drill in the pool once when he was doing some pool fence or something and he pulled it apart and left it to dry out and it was fine again
__________________
Black BAII XR8 Ute

Blue SY Territory Ghia


Quote:
Originally Posted by CAT600
No matter how good the F6 is (and it is damn good), its missing two cylinders.
kenz is offline   Reply With Quote Multi-Quote with this Post
Old 25-03-2010, 09:56 PM   #3
S3SR
FF.Com.Au Hardcore
 
S3SR's Avatar
 
Join Date: Dec 2005
Location: QLD - Townsville
Posts: 1,772
Default

my nokia was at the bottom of a river for a few hours... 6 weeks later it works still

id give it a quick blow with the compressor, but as far as i know there is going to be a bit of current flowing through there.... test your safety switch first hahaha
__________________
My Cars:

2002 Ford Falcon AU S3 SR
2006 BF MKI Falcon XR6
2008 Mazda BT50 SDX
2004 BA XR8 ute
2006 AUDI A4 B7
2013 FG II XR6 Ute
2006 Ford Territory TX
2003 Ford Falcon XR8
2009 Territory Turbo Ghia

Current: 2012 Audi A4 B8 2.0T Quattro
S3SR is offline   Reply With Quote Multi-Quote with this Post
Old 25-03-2010, 09:58 PM   #4
1970XW351
Angry Dub Driver
 
1970XW351's Avatar
 
Join Date: Dec 2007
Location: Toowoomba
Posts: 559
Default

I'd give it a go... Just blow all the crap out of it with the air comp first and maybe spray something around in there to try to stop anything oxidising too much (maybe silicone spray or similar and then blow out really well again with air??) and let it sit for a good couple weeks in a nice warm dry spot. quite a few years ago I heard of someone who had a party and someone decided to p!55 on their stereo. They just sat it in a wardrobe for a couple months to dry out and it worked okay after that...
1970XW351 is offline   Reply With Quote Multi-Quote with this Post
Old 25-03-2010, 09:59 PM   #5
wulos
Forum Director
 
wulos's Avatar
 
Join Date: Dec 2004
Location: Central Coast NSW
Posts: 5,741
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: All the behind-the-scenes effort. Technical Contributor: For members who share their technical expertise. - Issue reason: For his advice, tips/tricks in the Art and Photography section of the Forum. 
Default

It should be possible to salvage the welder, just be sure that it is perfectly clean, AND dry before switching it on. Tis worth giving it a quick blow over with compressed air, & a bit of a clean down with some contact cleaner spray, especially over the electronic control module, and reostat control on front, then leave it sit to dry out properly in the sun for at least a week
If you was over on the East Cost, I'd offer to whack it in one of the drying ovens at work for a few days.
wulos is offline   Reply With Quote Multi-Quote with this Post
Old 25-03-2010, 10:07 PM   #6
GTpilot
FG GT 5.4 w/ additions!
 
GTpilot's Avatar
 
Join Date: Jan 2007
Location: Sunny SE Melbourne
Posts: 2,105
Default

yeah as said above, let it all dry out thoroughly, should be right.
could even use a little wd40/RP7 on any rotational/ morotised tools such as drills etc just a very light spray should be enough to disperse water and prevent rust.
__________________
Quote:
Originally Posted by prasac
googoo gaga whoops sorry i thought this was the let's be whiny babies thread
GTpilot is offline   Reply With Quote Multi-Quote with this Post
Old 25-03-2010, 10:57 PM   #7
sgt_doofey
FF.Com.Au Hardcore
 
sgt_doofey's Avatar
 
Join Date: Aug 2005
Location: Barossa Valley, South Australia
Posts: 3,381
Default

I've had water poured on my laptop courtesy of my little nephew whilst it was turned on. I simply reached over, turned it off, pulled all that I could apart from it, left it a day or so to dry out and it is still going over a year later without any troubles.
__________________
Cheers,
Sam.
sgt_doofey is offline   Reply With Quote Multi-Quote with this Post
Old 25-03-2010, 11:14 PM   #8
schmidty
FF.Com.Au Hardcore
 
schmidty's Avatar
 
Join Date: Mar 2005
Location: Perth
Posts: 1,557
Default

Hit it with a can of CRC Lectra Clean. It's for cleaning electrical contacts and good for cleaning and drying bad connections. Brilliant stuff. I used to use it when i my power tools got drenched in the rain.
schmidty is offline   Reply With Quote Multi-Quote with this Post
Old 25-03-2010, 11:30 PM   #9
Road_Warrior
Pity the fool
 
Road_Warrior's Avatar
 
Join Date: Jan 2007
Location: Wait Awhile
Posts: 8,997
Default

Thanks chaps. I might give it a second chance on life then.
__________________
Fords I own or have owned:

1970 XW Falcon GT replica | 1970 XW Falcon | 1971 XY Fairmont | 1973 ZG Fairlane | 1986 XF Falcon panel van | 1987 XFII Falcon S-Pack | 1988 XF Falcon GLS ute | 1993 EBII Fairmont V8 | 1996 XG Falcon ute | 2000 AU Falcon wagon | 2004 BA Falcon XT | 2012 SZ Territory Titanium AWD

Proud to buy Australian and support Ford Australia through thick and thin
Road_Warrior is offline   Reply With Quote Multi-Quote with this Post
Old 26-03-2010, 05:15 PM   #10
irish2
FF.Com.Au Hardcore
 
Join Date: Nov 2006
Posts: 1,458
Default

The welder should be fine if cleaned properly. We have some of those cig weld welders at work however and have had numerous issues with them. They are very cheap however so replacement shouldn't be much of a stretch.
irish2 is offline   Reply With Quote Multi-Quote with this Post
Old 26-03-2010, 05:41 PM   #11
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default

cleant it thoroughly then drown it in metho leave to dry a few weeks and it will be fine . the metho displaces the water and dries faster and stops corosion
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty.

"It is better to remain silent and be thought a fool than to speak out and remove all doubt."

Start a new career as a bus driver

Rides:
FG2 XR6 stock at this stage but a very nice ride

xc 4 DOOR X CHASER 5.8 UNDER RESTO
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 26-03-2010, 06:19 PM   #12
ea90gl
FF.Com.Au Hardcore
 
ea90gl's Avatar
 
Join Date: Mar 2007
Location: Adelaide SA
Posts: 1,255
Default

should be fine like many have mentioned, I stupidly left my angle grinder in a wheelbarrow uncovered. Got some real heavy rains out of nowhere and completely forgot about the grinder. Discovered it at the bottom of a pretty much full barrow, pulled it out and let dry for about a week. Its still working to this day and its been about 6 months. Electrical appliances and electronics only usually get affected by water only while running/being operated (also from moisture and corrosion on terminals etc but but this happens gradually and as mentioned products that displace moisture can be used) because water creates a bridge of very little electrical resistence between conductors hence creating a short circuit - if you have no current flowing nothing blows, once current is flowing (obviously when in use) things go bang
ea90gl is offline   Reply With Quote Multi-Quote with this Post
Old 27-03-2010, 04:17 PM   #13
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
Default

Bugger fixing them, get the insurance company to buy a new ones !
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
Old 28-03-2010, 10:54 PM   #14
Road_Warrior
Pity the fool
 
Road_Warrior's Avatar
 
Join Date: Jan 2007
Location: Wait Awhile
Posts: 8,997
Default

Well I left it out in the sun for a day or so to dry right out, then blew all the crap out with compressed air and doused everything in CRC. Put it all back together, plugged it in and gave it a whirl - was as if it had never even seen water! So all is good
__________________
Fords I own or have owned:

1970 XW Falcon GT replica | 1970 XW Falcon | 1971 XY Fairmont | 1973 ZG Fairlane | 1986 XF Falcon panel van | 1987 XFII Falcon S-Pack | 1988 XF Falcon GLS ute | 1993 EBII Fairmont V8 | 1996 XG Falcon ute | 2000 AU Falcon wagon | 2004 BA Falcon XT | 2012 SZ Territory Titanium AWD

Proud to buy Australian and support Ford Australia through thick and thin
Road_Warrior is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:44 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL