|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
14-05-2010, 11:35 PM | #1 | ||
Starter Motor
Join Date: Apr 2010
Posts: 6
|
I've found a lonely little mkI esky, pretty sure I won't be able to help myself and I'll probably buy it. I'm wondering what my options are in QLD for an engine conversion?
I'll admit I don't even know what is in it yet! I'll find out next time I head out bush, there's no rush - it's been sitting where it is for a few years now. It seems to have a pretty straight, rust free body which is all I care about. So if you have a favourite or dream motor or even a dream setup for a mkI feel free to share! I'm all ears... Cheers, Tim. p.s. It had white(ish) paint and what I think were green stripes, over the bonnet and roof and/or down the doors. (Hey it was dark and I was only vaguely interested at the time!) Was this a factory option or did it denote a particular model? Maybe someone just had bad taste... ;) it isn't that bad, but I'd only copy it if it was original. Last edited by Bodge; 14-05-2010 at 11:41 PM. |
||
15-05-2010, 01:50 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Feb 2006
Location: Toowoomba
Posts: 2,634
|
2.5 i think is the biggest N/A u can go or a 2L turbo/blown and still have it rego'd.
__________________
1628 Escort Project Thread 67.3 RWHP - Paramount Performance Dyno DJ Automotive Tuned with proper jets http://fordforums.com.au/showthread....4&page=1&pp=25 |
||
18-05-2010, 10:07 PM | #3 | ||
Starter Motor
Join Date: Apr 2010
Posts: 6
|
Thanks Rob,
A mate was talking about a Transit van 2L DOHC with EFI that isn't too hard to fit. Cheers for the info, Tim. |
||
28-05-2010, 01:14 PM | #4 | ||
Starter Motor
Join Date: May 2010
Posts: 12
|
im putting in a 2l pinto atm, once i get that done n suspension n disk brakes done, im looking to put a 13bt setup in it, nice n lite, very powerful.
theres heaps of options, u can always get it engineered to be registered, u can go CA18det or SR20det, rotary or turbo pinto. depends what ya can get ya hands on. |
||
29-05-2010, 10:43 PM | #5 | ||
Rally Nut
Join Date: Feb 2009
Location: Melbourne
Posts: 297
|
Bodge - you will never get a straight answer on engine swaps as there will be the people who say stay with a ford power plant and others who will go for a jap motor
if you can & you can get it to work a Transit van 2L DOHC with EFI sounds a good options - at the end of the day, what ever you feel you want to put the time & effort into is the way to go |
||