Explorer Ecoboost 2.0: 176 Kw@ 5,500 and 337 nm torque 1,700 to 4,000

[jpd80]

OK, the important part of the new Explorer to Ford Australia fans is the power of the 2.0 Ecoboost,
176 Kw@ 5,500 and 337 nm torque 1,700 to 4,000...

Look out Holden SIDI 3.0, the Ecoboost 2.0 I-4 is coming after you.......

LINK

EcoBoost 2.0-liter I-4 delivers normally aspirated V6 punch
For SUV drivers seeking maximum fuel efficiency, Ford introduces the all-new Explorer with an available EcoBoost2.0-liter I-4. Combining direct injection of gasoline and turbocharging, this advanced engine delivers performance comparable to normally aspirated competitive V6 engines. Developing up to 237 horsepower at 5,500 rpm, this I-4 delivers 250 lb.-ft. of torque.

Estimated fuel economy improves by more than 30 percent, putting the fuel efficiency of the Ford Explorer in line with sedans such as the 2010 Toyota Camry V6.

Like other Ford EcoBoost engines, peak torque is generated at a low 1,700 rpm across a broad band to 4,000 rpm. This torque plateau makes for flexible, efficient power delivery across a wide range of engine and vehicle speeds, while helping save fuel by making power at lower rpm levels. Ti-VCT, four valves per cylinder and DAMB valve lifters increase mechanical efficiency through improved engine breathing across the broad power and torque bands.

A relatively high compression ratio is enabled by the use of direct gasoline injection, operating at fuel pressures from 2,200 to 2,800 psi. The unique turbocharger is optimally matched to the EcoBoost I-4 engine and SUV vehicle performance behavior. Precise fuel pressure control allows the Explorer I-4 to deliver boosted power at low rpm, without annoying turbo lag.

The EcoBoost I-4 uses 5W30-GF4 oil to reduce friction and reduce cost of ownership through 10,000-mile oil change intervals.

Targeted durability is 10 years, or 150,000 miles. Durability actions include enhanced oil filtration and cleanliness, the addition of an aluminum oil cooler with improved heat dissipation and cast inter-bore cooling inside the aluminum engine block. This engine represents the initial U.S.-market application of the brick-style charge-air cooler, delivering increased thermal efficiency.

The new 2.0-liter EcoBoost engine is being introduced globally by Ford Motor Company, with applications in various products in Europe, Asia and Australia, in addition to the new Explorer.

EcoBoost technology will serve as a key element in Ford’s global sustainability efforts, powering up to 1.3 million vehicles on an annual basis by 2013.

[TheInterceptor]

ah crap, a 2L 4 pot has more balls than my au 4L 6 pot...
dumb comparisons aside... it sounds like a winner to me! Decent power/torque figures and fuel efficency... Chuck this baby in the Falcon and we may see it actually take off.

[vztrt]

Originally Posted by jpd80

OK, the important part of the new Explorer to Ford Australia fans is the power of the 2.0 Ecoboost,
176 Kw@ 5,500 and 337 nm torque 1,700 to 4,000...

Look out Holden SIDI 3.0, the Ecoboost 2.0 I-4 is coming after you.......

SIDI 3L

190kW @ 6700rpm & 290Nm @ 2900rpm

I'd say the little 4pot will show it up.

[Brazen]

Its almost diesel-like in its torque curve

[jpd80]

What's the bet that Holden's "may the best car win...." advertisement gets pulled before Ecoboost 2.0 Arrives...

[nstg8a]

Originally Posted by TheInterceptor

ah crap, a 2L 4 pot has more balls than my au 4L 6 pot...

dont feel bad, its got more balls than my 5.0 8 pot....

[mik]

targeted durability 150000 miles or 240000 k`s...... pretty decent for a little lugger........edit* had a thought , how does/will the explorer compare to a falcon weight wise similarly equipped with the ecoboost engine?

[Falc'man]

Originally Posted by Brazen

Its almost diesel-like in its torque curve

Yes, at first glance it appears that way. However, look at how "low" the peak power is (for a 2 litre) and you know there's a lot more scope. Obviously for this kind of vehicle there's no point in extending the limit (and boost); better off for future iterations of hot Focuses.
Looking forward to seeing it in the Falcon, although, again, it's the type of vehicle that won't see a hotter version of this motor. It may even be a little easier to get more power - or same with less boost) through better breathing thanks to Falcon's rwd layout; the fwd layouts have less space to work with for the breathing hardware.

[prydey]

they need the greater non enthusiast public to accept it. my old man said to me last year 'i hear they're going to make a 4cyl falcon' and his facial expression told me all i needed to know. i don't think his mentality will be alone with the greater public.

of course everyone on here knows differently but ford enthusiasts on a ford enthusiast forum, doesn't = car sales.

they need to market it on its numbers and ability and try to make people forget its a 4cyl.

[vztrt]

Originally Posted by mik

targeted durability 150000 miles or 240000 k`s...... pretty decent for a little lugger........edit* had a thought , how does/will the explorer compare to a falcon weight wise similarly equipped with the ecoboost engine?

Taking a look at the current weights.

2021kg for the base 2010 explorer 1704kg for the XT Falcon.
(figures from Ford web sites)

One would assume the weight loss would be close to the same.

[phillyc]

Originally Posted by vztrt

SIDI 3L

190kW @ 6700rpm & 290Nm @ 2900rpm

I'd say the little 4pot will show it up.

Have to agree. The 2.0 EB's 337Nm of torque is 16% better than the 3.0 SIDI's 290Nm. At the 5,500rpm power peak of 176kW for the 2.0, means 305Nm is still being churned out. Again its 5% more than the peak of the 3.0 SIDI. The 3.0 SIDI is putting out 270Nm @ 6700 to make 190kW. Given the rather unlikely scenario that the SIDI was able to maintain a peak torque plateau like the 2.0 EB, the full 290Nm would be required at 5800rpm to make 176kW.

This means that the EB makes more torque than SIDI from at least 1700rpm until 5500rpm and most likely up to 5800-6000rpm...

[Falc'man]

MAJOR SUV FUEL ECONOMY GAINS, TECHNOLOGY, STYLE HIGHLIGHT REINVENTION OF FORD EXPLORER

• Ford reinvents the Explorer SUV with best-in-class fuel economy, improved driving dynamics and terrain management system – all wrapped in a modern, weight-saving design
• Explorer raises the bar on safety with a class-leading array of airbags including industry-first inflatable rear seat belts, Trinity front impact structure, AdvanceTrac® with RSC® (Roll Stability Control™) and Curve Control functionality
• Explorer features MyFord Touch™ driver connect technology and SYNC® integrated communications and entertainment system to help keep a driver’s eyes on the road and hands on the wheel. Explorer offers more technology than in-class competitors, rivaling content found in premium SUVs

DEARBORN, Mich., July 26, 2010 – Ford Explorer – the vehicle that defined a segment – has been completely reinvented, raising customers’ expectations of sport utility vehicle (SUV) fuel efficiency, safety, technology, capability and quality.

“The all-new Explorer will deliver today’s SUV buyers the attributes they really want and value, and a few they might not even have dreamed of,” said Mark Fields, Ford president of The Americas. “We’re proud to introduce the new Explorer to customers and fans around the world today and pleased to begin a whole new era that blends strong SUV fuel economy and performance.”



The all-new Explorer launches today to its Facebook friends in a unique social media initiative, followed by reveal events throughout the U.S. and Canada.

Shattering SUV fuel economy and performance expectations
“The new Explorer simply does everything well,” said Derrick Kuzak, group vice president, Global Product Development. “It raises the bar for ride and handling on the road and transforms the off-road experience. It’s the hands-down winner for towing capability and ease. All this capability – and three rows of seating – with amazing fuel economy will make Explorer the absolute right choice for families with a sense of adventure.”

The 2011 Explorer with V6 power is expected to deliver more than 20 percent better fuel economy than the 2010 model, shattering conventional expectations for SUV fuel efficiency. When equipped with the available 2.0-liter EcoBoost™ I-4 engine, Explorer fuel economy is expected to improve by more than 30 percent and exceed the 2010 Honda Pilot and 2010 Toyota Highlander V6.



Chief Nameplate Engineer Jim Holland said the team targeted two key objectives when developing the 2011 Ford Explorer.

“It had to look modern and contemporary – inside and out – yet be instantly recognizable as an Explorer,” said Holland. “Next, the new Explorer needed to deliver the fuel economy today’s customers want, combined with the performance, capability and empowerment they expect from an SUV.”

Driven by the commitment to give customers unsurpassed fuel efficiency with each new vehicle, Ford attacked every detail to transform Explorer with significantly improved fuel economy:

• Twin independent variable camshaft timing (Ti-VCT)
• Latest Ford EcoBoost engine
• Six-speed automatic transmissions
• Electric power-assisted steering (EPAS) to significantly reduce parasitic power loss
• Intelligent four-wheel drive (4WD)
• Variable-displacement air-conditioning compressor
• Optimized tires for reduced rolling resistance
• Slippery aerodynamics with harmonized front air dam and rear liftgate spoiler

Weight reduction is a key element in improving Explorer fuel efficiency. While adding significant content to the vehicle, engineers were able to reduce total vehicle weight by almost 100 pounds through the use of lighter materials such as an aluminum hood. Explorer weight loss is even more impressive, as the latest versions of Honda Pilot and Toyota 4Runner have added pounds versus previous models.

Explorer’s available advanced 2.0-liter EcoBoost I-4 delivers the power of a normally aspirated V6 without compromising four-cylinder fuel economy. Aimed at the SUV buyer whose top priority is fuel economy, this turbocharged and intercooled I-4 engine delivers a projected 237 horsepower at 5,500 rpm and 250 lb.-ft. of torque from 1,700 through 4,000 rpm. The EcoBoost employs direct injection of gasoline, Ti-VCT, direct-acting mechanical bucket (DAMB) valve lifters and four valves per cylinder.



Explorer’s standard powertrain combines front-wheel drive with a 3.5-liter Ti-VCT V6 engine, delivering an estimated 290 horsepower and 255 lb.-ft. of torque. Ti-VCT allows individually optimized camshaft timing of valve opening and closing events to improve mechanical efficiency while delivering increased power and reducing part-throttle emissions. Mated to a six-speed automatic transmission, this powerful, flexible and efficient V6 is projected to deliver more than 20 percent better fuel economy versus the previous Explorer V6 model.

Explorer’s variable-displacement air-conditioning compressor provides a fuel economy benefit with less drag and smoother transition for improved driveability.

Each Explorer engine is paired with a unique six-speed automatic transmission, combining lowered initial gears for improved off-the-line acceleration and higher gearing for improved efficiency at lower engine rpm when cruising.

Explorer V6 models are available with an intelligent 4WD system that adds terrain management. Situation-selectable, this powertrain advancement takes the guesswork out of 4WD range choice.

A driver need only turn the console-mounted knob to the proper setting among snow, sand, mud and normal modes. This system also includes a hill descent mode.

Simpler and more convenient for SUV veterans, the system will be a confidence-builder for drivers new to the segment.



Contemporary design with segment-leading craftsmanship and quietness
In addition to its clean, modern design inside and out, Explorer aims to please SUV shoppers with a thoughtful, flexible interior package that abounds with clever storage capacity. The new SUV features more head and shoulder room, three rows of flexible seating, and room for everything families want to take along on their adventures.

The Explorer design – inside and out – is executed with world-class craftsmanship. Tight margin gaps are just one indication of the immense attention to detail applied to craftsmanship across the spectrum, from design to engineering to manufacturing.

The Chicago facility where Explorer will be produced raised the bar on initial quality measures with the recent Taurus launch, which is good news for customers.

“Crafting a high-quality vehicle is like preparing a gourmet meal,” said Peter Bejin, craftsmanship supervisor. “You start with high-quality ingredients, execute your recipe with flawless preparation and finally, present it with flair and panache.”

Quietness – another profound advancement in the all-new 2011 Ford Explorer – also will signal quality to customers.

The team enhanced noise, vibration and harshness (NVH) control for the all-new Explorer using an advanced technology called NoiseVision. A ball with hundreds of tiny cameras and microphones, NoiseVision allows engineers to pinpoint and address potential noise issues earlier in the development process.

Explorer is expected to be superior to in-segment competitors and rival premium SUVs in quietness and NVH control.



Explorer safety – strength, technology and innovation
The all-new Explorer targets top safety ratings with a stiff unibody structure and a class-leading suite of active and passive safety features and technologies, plus another Ford safety innovation – the world’s first second-row inflatable rear belts.

Rear seat passengers – often children or mature passengers – can be more vulnerable to head, chest and neck injuries. Ford’s unique inflatable rear belts spread impact forces across more than five times the area than conventional seat belts, reducing pressure on the chest while helping to control head and neck motion. Belt comfort should also help increase usage rates. Studies show inflatable belts to be more comfortable for passengers due to padding.

From the boron front bumper beam through the hydroformed front frame rails and high-strength steel side-impact tubes, Explorer’s rigid body structure is designed to provide robust protection for occupants. In the instance of a crash, these elements come together to protect Explorer driver and passengers inside a safety cage of strength.

Standard Explorer safety features include:

• AdvanceTrac with RSC features Curve Control functionality to provide braking – optimized by each individual wheel
• Second-generation first-row airbags, side seat airbags
• Belt-Minder® for driver and first-row passenger
• Front passenger sensing system
• Energy-management system pretensioning for height-adjustable first-row seat belts
• LATCH (Lower Anchors and Tethers for CHildren) system for outboard second-row positions, for safely securing child safety seats
• SOS Post-Crash Alert System™
• Safety Canopy® side curtain airbags
• Tire Pressure Monitoring System

Available Explorer safety features include:

• Adaptive cruise control and collision warning with brake support
• BLIS® (Blind Spot Information System) with cross-traffic alert

Stretching the breadth of capability
The 2011 Ford Explorer redefines customer expectations for driving dynamics and comfort – on any road, anytime, anywhere – while stretching the breadth of SUV capability. Transforming Explorer’s driving quality was central to creating an SUV for 21st century customers.

“Our objectives for Explorer dynamics were threefold,” said Carl Widmann, vehicle engineering manager. “The first element was to greatly increase on-road comfort, capability and driving dynamics. The second was to maintain the ‘any road, anytime, anywhere’ capability of the previous model. Finally, we aimed to apply technology to the task of safely towing, as V6 Explorer models are rated up to 5,000 pounds. We think customers will be pleased with the next-generation Explorer on all three counts.”

The theme of the all-new Explorer dynamics development was balance. The team sought to provide an engaging driver experience in harmony with the extended breadth of 4WD capability to build driver confidence.

The shift to a unibody construction platform enabled a reduction in road noise and significantly decreased Explorer body roll in dynamic cornering situations. Independent front suspension is of the short- and long-arm configuration with a 32-millimeter front stabilizer bar. Independent rear suspension is the SR1 configuration, so-named for its one-to-one shock absorber ratio, which enables precise ride control.

Explorer’s EPAS system allows for variable rates of assistance based on speed, turn-in and direction. In addition to optimized steering feel, tight on-centering and appropriate resistance, EPAS provides a fuel economy benefit in comparison to traditional hydraulic power assist systems. EPAS also enables a competitive turning radius for optimum maneuverability in parking situations, combined with increased assistance at low speeds for parking ease.

EPAS allows for the addition of Curve Control, a new feature that senses when a driver enters a turn too quickly and applies brake pressure to stabilize the vehicle.



In addition, EPAS enables the optional active park assist technology. When activated, the system scans for a suitable spot, calculates the trajectory, and steers the vehicle. The driver continues to control brake and throttle inputs, but the system steers the vehicle throughout the parking maneuver.

Off-roading standout on a variety of surfaces
The key to Explorer 4WD capability is Ford’s new terrain management system.

Replacing the traditional SUV transfer case configuration, the new system takes the guesswork out of maximizing 4WD and the capabilities it enables. Rather than employment of four-high, four-low and auto settings, Explorer terrain management is selectable by situation. The four settings – available by shift-on-the-fly – include normal, mud, sand and snow.

Each setting provides unique engine behavior, throttle tip-in, transmission shift scheduling and calibrations for traction and stability control systems. Terrain management also includes Hill Descent Control™, which provides engine braking to increase driver confidence and control when descending a steep incline.

Explorer models with V6 power are rated to tow a maximum of 5,000 pounds. To aid with hookup – especially when alone – a reverse camera with zoom-in functionality is available, allowing a driver to back up to the trailer on-center. The Explorer towing package includes trailer sway control – a stability package shared with the Ford F-150 pickup – to help minimize trailer sway. Trailer brake controller wiring is also included, as is a tow/haul mode. Engaging tow/haul mode increases engine braking to help slow the vehicle and trailer when descending steep grades.

Loaded with features, convenience and connectivity
The all-new Explorer is available in three trim series levels – base, XLT and Limited. Each offering presents a robust array of standard features, with a class-leading selection of additional convenience and connectivity options so a buyer can tailor a new Explorer to his or her individual needs and desires.


Standard convenience features include:

• MyForddriver connect technology including 4.2-inch LCD screen
• MyKey™ owner control feature
• Air filtration system
• Media hub
• Easy Fuel® capless fuel filler system
• Cruise control
• Power windows, with one-touch down for driver
• Power door locks with child safety rear door locks
• Tilt/telescoping steering column
• Four 12-volt power points
• Cargo hooks

Explorer XLT includes standard content and adds:

• Automatic headlamps
• Six-speed SelectShift Automatic™
• Heated sideview mirrors with LED signal indicators and security approach lamps
• SecuriCode™ keyless entry keypad
• Reverse sensing system
• Perimeter alarm

Explorer Limited includes all base and XLT content, plus:

• PowerFold® sideview mirrors with driver’s side memory
• Ambient lighting
• Adjustable pedals with memory functionality
• Cargo net
• Dual-zone electronic temperature control
• 10-way power driver’s seat, with power recline and lumbar
• Electrochromic interior mirror
• Rear view camera
• Remote start system
• 110-volt outlet
• MyFord Touchdriver connect technology
• Intelligent Access with push-button start
• Universal garage door opener

“We spent our time listening to customers and addressing their needs to launch an SUV that reinvigorates the Explorer nameplate and delivers on Ford’s promise of high-quality, fuel-efficient and technologically advanced vehicles with industry-leading safety,” said Holland. “The all-new Explorer will change market perceptions about SUV style, fuel efficiency, technology and user-friendliness.”

The 2011 Explorer will be assembled at Ford’s Chicago manufacturing facility. Production begins late this year, and Explorer will be available in dealerships this winter.



Ford media.

[prydey]

they need the greater non enthusiast public to accept it. my old man said to me last year 'i hear they're going to make a 4cyl falcon' and his facial expression told me all i needed to know. i don't think his mentality will be alone with the greater public.

of course everyone on here knows differently but ford enthusiasts on a ford enthusiast forum, doesn't = car sales.

they need to market it on its numbers and ability and try to make people forget its a 4cyl.

[Franco Cozzo]

Thats a freakin' HOT SUV!

[prydey]

double up

[fg_nitro]

I am going to say it but makes the territory and falcon look old hat. That interior is nuts.

[Brazen]

That is beautiful. I love that touch sensitive centre console - rather than the old fashioned buttons.

In $70,000 FPVs the steering wheel buttons arnt even lit, but in this thing the door handles and even the cupholders are.

[TheInterceptor]

Now thats impressive!

[jpd80]

Originally Posted by fg_nitro

I am going to say it but makes the territory and falcon look old hat. That interior is nuts.

Yeah, it's not like Ford North America's products really suck anymore,
these guys are really getting their act together and it would be great
to see FoA able to share electrical systems and features.

[Fiesta God]

That is a beautiful motor vehicle.

Talk about the latest in technology and design. Incredible what Ford have packed into one car, particularly with the obviously detailed amount of engine work they have done.

Will be fantastic when the T4cyl engine arrives in Australia ...

[barra265t]

O_O.. This thing makes the territory look like something out of the 80s.. something I thought wasnt possible.

[jpd80]

Originally Posted by barra265t

O_O.. This thing makes the territory look like something out of the 80s.. something I thought wasnt possible.

OK I'll be the one,(gulp)
I wonder how a Ford Austraila clinic would go with a RHD Explorer,
particularly if a transversely mounted (as in Peugeot) 2.7 V6 TCDI was available.....

[FPV GTHO]

Are those the same wheels as those fitted to the Taurus SHO or just a similar design?

[Fev]

Great looking automobile and a schmick interior. I very much doubt what we get will be the same as that package. I hope we do though, should steal alot of X5 and ML-series luxury customers

[SteveJH]

Originally Posted by jpd80

OK I'll be the one,(gulp)
I wonder how a Ford Austraila clinic would go with a RHD Explorer,
particularly if a transversely mounted (as in Peugeot) 2.7 V6 TCDI was available.....

Taking it one step further, what about if a 3.0 V6 TCDI was available?

[morak001]

Originally Posted by nstg8a

dont feel bad, its got more balls than my 5.0 8 pot....

even my old XD 5.8 was rated at 162.5kw.....

[Seduce XR6]

This engine sounds great as an economy alternative but will it really compare to the I6 for performance or pulling power?

How will the economy be when loaded for the hols or driven a bit hard as without the torque of the I6 we are used to many drivers will use more throttle than they do with the I6

But I do agree are amazing on paper results for a 2.0L 4

It would go hard in a Mondeo

[chevypower]

@Seduce, I would bet this 2.0 EB has more low-end torque at 1700 rpm than the 4.0 I6 does. It will perform just fine.

[jpd80]

Originally Posted by morak001

even my old XD 5.8 was rated at 162.5kw.....

My XD 5.8 was 149 Kw and 409 nm with single exhaust,
the XC with duals was 162 Kw and 429 nm.

Here's a head shock, XD 4.9 single exhaust: 140 Kw and 344 nm...
Ecoboost 2.0 pretty much matches this engine and betters it for fuel economy.

We've come a long way in 30-35 years.....

[jpd80]

Originally Posted by Seduce XR6

This engine sounds great as an economy alternative but will it really compare to the I6 for performance or pulling power?

How will the economy be when loaded for the hols or driven a bit hard as without the torque of the I6 we are used to many drivers will use more throttle than they do with the I6

But I do agree are amazing on paper results for a 2.0L 4

It would go hard in a Mondeo

What about people who would normally buy large mid sized vehicles?
Sure the Falcon is dearer but so too is the hybrid Camry or diesel Mondeo/Mazda 6.

I just did a few "what ifs" with Ecoboost 2.0 capacity:

3.0 Inline 6 - 264 Kw and 505 nm !!!!!
4.0 V8 - 352 Kw and 674 nm !!!!!