Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 19-07-2010, 07:31 PM   #1
sic 40t
Regular Member
 
Join Date: May 2009
Posts: 269
Question gear box modulator

hi i have a 85 kb lazer about to get it rego. If you leave it running 10-15 min then rev it it blows smoke i thought it was valve stem seals put a brick on the gas pedal and rev it 3000rpm for a one hour all good now. Left it for a whole day then started it sweet but no gear box oil no leaks they told me it the modulater on the gear box sucking the oil into manifold and burning it sound right?. What does a modulator do???????

sic 40t is offline   Reply With Quote Multi-Quote with this Post
Old 10-08-2010, 10:27 AM   #2
Peter B - CV8
FF.Com.Au Hardcore
 
Join Date: Sep 2005
Posts: 1,380
Default

The modulator is a round unit (like a sender unit) attached to the auto transmission - with a rubber hose connection (for vacuum). There is an internal seal to prevent transmission fluid being sucked up into the inlet area & blowing lots of white smoke. You can do a quick check to see if the seal has perished - just pull the rubber hose out of the modulator. If there is fluid inside of the hose then the seal has gone. If it's dry then its ok.
Replacement modulators are around the $40- mark, but make sure you get the correct one for your vehicle year etc - as there are a few different varieties. It's an easy DIY to change - just unscrew the old one & screw in the new one.
Peter B - CV8 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 05:33 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL