Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > The Bar

The Bar For non Automotive Related Chat

Reply
 
Thread Tools Display Modes
Old 22-08-2010, 12:54 PM   #1
FG XR
Custom FG XR6!
 
FG XR's Avatar
 
Join Date: Nov 2009
Location: Perth - N.O.R
Posts: 1,094
Technical Contributor: For members who share their technical expertise. - Issue reason: Always keen to get on board and help others along the way 
Default A lucky escape.

OK,

Not a rant thread but thought someone may find interesting.

Yesterday morning i dropped the wifes 2008 Nissan Tiida into a workshop for its 50k service. We have being going to them years without any issues (not naming company).

Picked the car up just before lunchtime nothing was an issue car was driving much better. Anyway wife went to the shops down the road to do some shopping but when she was leaving the carpark she noticed a small puddle of what she thought was water where her car was parked. She started driving home and she called me saying the oil pressure light had just come on and was blinking and the engine was making a loud ticking noise. At this point she was just around the corner from home. I told her to be careful and nurse the car home and ill take a look. She pulled up and i met her out the front. I immediatley saw oil coming from underneath the car and put a big piece of cardboard underneath the car to catch the oil and turned the car off.

Opening the bonnet everything looked all right however looking underneath the car ALOT of oil was pouring out from the sump. The workshop closes at 12pm and it was now 2pm. I tried calling them none the less and to my surprise he answered and he had set his workshop phone to divert (phew!). Told him what happened and is currently happening and he said he would come over to have a look. Within 15 minutes he was over and the expression on his face when he saw the oil was shocking to say the least....

He jacked the car up and saw the sump bolt (which they replaced on the 50k service) had GONE. He made a few calls and apologised every minute. He said he was going to pickup some tools and will return in 20 minutes.

When he returned he replaced the sump bolt, put new oil in the car and took for a test drive around the block and said everything was fine. I asked him about the internals and he said they sounded fine as the engine started fine without an hiccups and was idling fine.

I mentioned my wife seeing the puddle of what she thought was water from air con in the carpark down the road at the shops but he said if the bolt had gone then the car wouldnt have made it home and we would be looking at a new engine (replaced by his company ofcourse).

Anyway he left and said to drop the car in Monday morning and he will degrease the engine and check over everything again to make sure everything was ok (apologising again). He cleaned up all the oil and degreased the garage and driveway before leaving.

We are not that mad as everything was fixed and the guy was really sorry and more than helpful. I think whoever the mechanic was who worked on my wifes car would have gotten a nice phone call from his boss later that day.

Wife hesitant with driving her car now as she is worried the same thing will happen. Considering we have a 6 month old daughter i can kind of see her point (breaking down in the middle of traffic etc).

Took the car for a quick drive around our suburb and to the shops and i found the sump bolt at a round-about just around the corner from our house. Big puddle of oil too.... however the carpark at the shops it looks like an oil swimming pool. God knows how my wife made it home without the engine siezing up! But looks like bolt started coming loose at the shops but eventually gave way just around the corner from home.. will have to get pics of this too i think just incase.. (got a heap already just incase something happens down the track but just a few below)

Pics attached...






bone dry.







__________________
2009 FG XR6
BUILT BY FORD, TWEAKED BY ME!

Last edited by FG XR; 22-08-2010 at 12:59 PM.
FG XR is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 12:59 PM   #2
silicon
Regular Member
 
silicon's Avatar
 
Join Date: Jun 2006
Location: Central West, NSW
Posts: 396
Default

I wonder how the internals in the motor are now? A little bit of bearing damage at the very least?
silicon is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 12:59 PM   #3
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Was thinking the same thing..
I'd get it checked by someone else too..
Just to get a second opinion..
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 01:03 PM   #4
FG XR
Custom FG XR6!
 
FG XR's Avatar
 
Join Date: Nov 2009
Location: Perth - N.O.R
Posts: 1,094
Technical Contributor: For members who share their technical expertise. - Issue reason: Always keen to get on board and help others along the way 
Default

car seems to be running fine but ill get them to take a look on monday when the car is there. Got all the photos saved just incase ya know... glad the engine didnt seize up as my wife uses her car all the time for work (property manager).
__________________
2009 FG XR6
BUILT BY FORD, TWEAKED BY ME!
FG XR is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 01:41 PM   #5
Jim Goose
FF.Com.Au Hardcore
 
Join Date: Feb 2010
Location: Sun City, North Australis
Posts: 4,274
Default

If the car is under warranty, get it noted in the logbooks that the oil was lost today etc etc.... Just in case down the track you need to make a claim.
Id also talk to Nissan (again if its under warranty).

Strange that the sump plug was just put on and not tightened.
Im guessing the mechanic was distracted, walked away came back, lowered the car and put the oil in.
Never ever walk away from a job while installing or tightening something.
If you have to walk off, remove the item so you know the job isnt done, or finish the job.
__________________
You've seen it, you've heard it and your still asking questions??

Don't write off the Goose until you see the box going into the hole....
Jim Goose is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 01:56 PM   #6
Peuty
Afterburner + skids =
Donating Member1
 
Peuty's Avatar
 
Join Date: Dec 2004
Location: Skidsville
Posts: 12,136
Default

So I take it the guy wasn't a nissan dealer? If not, i certainly wouldn't be telling nissan about this, as chances are they'll void your engine warranty on the spot. I know noone ever sees the value in getting your car serviced by a dealer, but it's for reasons like this that it is worth it, if only for the duration of the warranty period.
__________________
Speed Kills. So buy an AU XR8 and live forever.

Oo\===/oO
Peuty is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 02:55 PM   #7
FG XR
Custom FG XR6!
 
FG XR's Avatar
 
Join Date: Nov 2009
Location: Perth - N.O.R
Posts: 1,094
Technical Contributor: For members who share their technical expertise. - Issue reason: Always keen to get on board and help others along the way 
Default

car has about 6 months left on the warranty log book always being stamped at every service.

I agree, bolt was put in but not tightened or he became distracted
__________________
2009 FG XR6
BUILT BY FORD, TWEAKED BY ME!
FG XR is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 03:09 PM   #8
Kryton
 
Kryton's Avatar
 
Join Date: Dec 2004
Posts: 9,292
Default

Id get a compression test done on it just to be sure.
Good to hear they have acted on it anyway and not given you the run around (or the - 'must be your fault' answer).
Kryton is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 04:15 PM   #9
Bobman
Regulator
 
Bobman's Avatar
 
Join Date: Jan 2005
Location: Melbourne
Posts: 4,168
Default

Another reason to do your own servicing!

Good to hear that it ended well though and the boss was helpful.
__________________
Regards
Bobby

Current Cars:
2000 AU2 Fairmont (2019-current)
2003 BA1 Falcon Divvy Van (2017-current)
2009 VW Mk6 Golf 118TSi (2020-current)
Previous Cars:
2003 MCX10R Avalon VXi (2017-2020)
1995 EF1 Falcon GLi (2016-2019)
1997 XH2 Falcon Van OPT20 (2016-2019)
2006 BF Fairlane Ghia (2013-2018)
2001 AU3 Futura (2010-2013)
1996 EL Fairmont (2008-2010)
2004 BA XR6 (2005-2008)
2001 AU2 Forte (2005-2006)
1988 EA Fairmont Ghia (2003-2005)
1984 AR Telstar TX5 Ghia (2001-2005)
Bobman is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 04:45 PM   #10
smoo
FF.Com.Au Hardcore
 
smoo's Avatar
 
Join Date: Jan 2005
Posts: 3,317
Default

They should be pulling off the big end/mains caps and checking out the bearings. As well as the cam lobes etc.
In saying that you'd be suprised how long an engine can go wothout oil or decent oil pressure lol.
Now is a decent excuse to trade it on a Falcon.
smoo is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 05:16 PM   #11
irish2
FF.Com.Au Hardcore
 
Join Date: Nov 2006
Posts: 1,458
Default

Quote:
Originally Posted by davway
Id get a compression test done on it just to be sure.
Good to hear they have acted on it anyway and not given you the run around (or the - 'must be your fault' answer).

Compression won't have suffered as a result of oil starvation. The bearings on the crank, camshaft and cam followers might be a bit worse for wear. At that short of a distance however it probably won't have done much more damage that another 20,000km would have anyway. There is no real way to check for damage without dessasembly of the bottom end. I have seen motors that have been starved for a longer period that have lasted longer than a decade afterward.
irish2 is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 08:10 PM   #12
wrongwaynorris
FF.Com.Au Hardcore
 
wrongwaynorris's Avatar
 
Join Date: May 2006
Location: Sydney
Posts: 1,868
Default

Can't believe you told her to nurse it home with the oil light on and knocking coming from the engine . There will be some level of bearing damage .
wrongwaynorris is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 08:26 PM   #13
FG XR
Custom FG XR6!
 
FG XR's Avatar
 
Join Date: Nov 2009
Location: Perth - N.O.R
Posts: 1,094
Technical Contributor: For members who share their technical expertise. - Issue reason: Always keen to get on board and help others along the way 
Default

Quote:
Originally Posted by wrongwaynorris
Can't believe you told her to nurse it home with the oil light on and knocking coming from the engine . There will be some level of bearing damage .
yes i did because she was down the road from our house e.g 500 metres when i got the phone call.

The shops are 2kms away from home.

I have driven the car all day and its sounds fine, no noise, idles fine and runs like it should.
__________________
2009 FG XR6
BUILT BY FORD, TWEAKED BY ME!
FG XR is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 08:47 PM   #14
XR6Runner
Sling Shot
 
Join Date: Jun 2009
Location: Canberra
Posts: 444
Default

Just got to say, well done to the owner/boss of that Mechanics shop for acting the way he did. Came straight away to your house, even cleaned up your driveway!

This guy knows how to run a business!
XR6Runner is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2010, 09:36 PM   #15
Riksta
Captain Malcolm Reynolds
 
Riksta's Avatar
 
Join Date: Mar 2007
Location: Adelaide
Posts: 3,830
Default

Quote:
Originally Posted by XR6Runner
Just got to say, well done to the owner/boss of that Mechanics shop for acting the way he did. Came straight away to your house, even cleaned up your driveway!

This guy knows how to run a business!
Agreed. I don't think there would be an issue in naming the company. Fair enough they messed up, but actually showing the care that he did and taking responsibility for an error made is not something most people care to do these days.

Hope everything turns out ok and that there isn't any damage.
__________________
Currently: 2014 Mazda6 GT (Daily) and 1999 Mazda MX5 (Fun Car)
Previously: 2001 Ford Escape XLT; 2010 MC Mondeo; 1984 FD LTD; 2001 AU2 Falcon Forte; 2005 LS Focus Zetec; 1988 RE Colt; 1982 RB Colt; 1974 KE20 Corolla
Quote:
Originally Posted by Nikked
Riksta likes VN's so much, he has the ashes of a VN in a jar on the mantle piece, a vile of VN engine oil hanging from his neck and a BT1 build plate locked up in a safe, buried under 6ft of concrete.
Quote:
Originally Posted by Day-mow
pretty much what has happened here is i trolled you. and it was fun.
Riksta is offline   Reply With Quote Multi-Quote with this Post
Old 29-08-2010, 12:28 AM   #16
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by XR6Runner
Just got to say, well done to the owner/boss of that Mechanics shop for acting the way he did. Came straight away to your house, even cleaned up your driveway!

This guy knows how to run a business!
I also agree with this - top effort on his part.

I had an old Datsun 1600 with a 180B motor in it, and lost the oil cap (we heard a bang/pop noise, but didn't stop) coming in to Murrambateman (NSW) which is about 25km from Yass. Yass was our destination for lunch, and when we stopped, smoke was coming from under the bonnet and it stunk. There was oil everywhere. Long story short, a 4L oil container, and one of those temp petrol caps saw us get back to Canberra wityh a stop on the sweeping corner into Murrumbateman where we heard the pop - you wouldn't believe it, but we found the oil cap! That car lasted at least another 3 years after that event, and never used a drop of oil!

I think a 2km trip while losing oil should be OK - just check the metal filings in the filter after next oil change, and that should give you an indication of any more than usual wear (you will need to cut the filter open and use a magnet to extract the metal from the oil).
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 29-08-2010, 10:37 AM   #17
latefordtragic
Regular Member
 
Join Date: Aug 2010
Posts: 36
Default

Hmmm,
I would remove the rocker cover and have a look at the cam journals, this tis the point that wiil suffer of oil starvation first. If there is damage you will see metal that would have oozed out of the journal under the extreme temperature of friction.

JC's comment above about checking the oil filter is a good idea, but i probably wouldn't leave it till the next service i'd do it as soon as possible. Umm i probably wouldnt bother with a magnet, as the metal caught up in the filter will probably be non ferrous i.e. aluminium from the head or whitemetal from the bottom end bearings. The filter will be contaminated with this kind of metal before it will have any metal from the cam or crank.
Take note of any knocking sound on start up, this is the way you will diagnose a light clearance issue that might have been caused at the bottom end
Good luck buddy
latefordtragic is offline   Reply With Quote Multi-Quote with this Post
Old 31-08-2010, 03:57 PM   #18
The Yeti
FF.Com.Au Hardcore
 
The Yeti's Avatar
 
Join Date: May 2006
Location: In my happy place
Posts: 5,432
Default

Whilst not great driving it with out oil, its not the end of the world, if it were a nissan dealer get it noted for warranty, if not get oil samples taken and the next few services to monitor for high levels of bearing material

Pulling bearing caps to inspect could do more harm than good

top marks for the service manager's handeling of the incident, yep his guy stuffed up, but he went all out to see you were back on the road quickly and cleaned up the mess. I wonder how many shops would have handeled it this well
__________________
Pariahs C.C.
What could possibly go wrong

I post images with postimg.cc (so I don’t forget)
The Yeti is offline   Reply With Quote Multi-Quote with this Post
Old 31-08-2010, 04:41 PM   #19
04redxr8
FF.Com.Au Hardcore
 
04redxr8's Avatar
 
Join Date: Apr 2007
Posts: 601
Default

I think you could name the mechanic as this is great service rather than bad. It's also great that He came to your house after hours, admitted fault, accepted responsibility and I'm guessing from your OP, would have replace the engine if required.

Mistakes and errors are a part of life. Everybody makes them, and I am sure everyone here has made the odd mistake in their working life.

If you're not hearing any noises, then I would say all is fine. If your wife only nursed the car home less than 1km, then you really may have nothing to worry about. While the sump may have ran out, the engine components would still have had a degree of oil coating them. Atleast enough to gently make it home.

Another point, if the engine cap was still on, then the oil would have came out at a slower rate. The oil only runs out full speed when the cap is removed.

I think you should be fine. But have your mechanic check it for you anyway.He actually sounds trustworthy to me.
04redxr8 is offline   Reply With Quote Multi-Quote with this Post
Old 31-08-2010, 05:52 PM   #20
GORDZ
OMGORDZ
 
GORDZ's Avatar
 
Join Date: Jun 2007
Location: SE, Melbourne
Posts: 2,352
Default

i know for a fact that a BA with failed oil pump gears can drive from the mobil on the western ringroad to the top of the westgate bridge (roughly 10k's) before it seizes =)

I got the tshirt.
__________________
Gordz Bluesprint Build Thread


BA XR6 Ute, twin throttlebodied blueprint.
GORDZ is offline   Reply With Quote Multi-Quote with this Post
Old 05-09-2010, 05:19 AM   #21
ILLaViTaR
FF.Com.Au Hardcore
 
ILLaViTaR's Avatar
 
Join Date: Mar 2007
Posts: 2,699
Default

Pfffft I had a dry sump in my old ED for nearly a month (To be fair when i drained the sump there was like 500ml in there). Cars aren't as delicate as people say they are.
And I know many cars that have been ran on an empty sump. The record holder, an XF paddock bomb that lasted 3000k's after the sump was drained and that was 3000k's of paddock bashing.
__________________
EB II 1992 Fairmont - koni reds, wade 977b, 2.5inch/4480's and much more to come!
ILLaViTaR is offline   Reply With Quote Multi-Quote with this Post
Old 05-09-2010, 07:45 AM   #22
DJM83
Barra Turbo > V8
Donating Member3
 
DJM83's Avatar
 
Join Date: Jan 2005
Posts: 26,017
Default

Quote:
Originally Posted by ILLaViTaR
Pfffft I had a dry sump in my old ED for nearly a month (To be fair when i drained the sump there was like 500ml in there). Cars aren't as delicate as people say they are.
And I know many cars that have been ran on an empty sump. The record holder, an XF paddock bomb that lasted 3000k's after the sump was drained and that was 3000k's of paddock bashing.
Yeah sure you have done that whilst it didnt have any short term damage ill bet it has some long term effects
__________________
-2011 XR6 Turbo Ute - Lux Pack - M6
-2022 Hyundai Tucson Highlander Diesel N Line
DJM83 is online now   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:20 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL