|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
30-09-2005, 06:44 PM
|
#1 | ||
|
Guest
Posts: n/a
|
here's some pic's i got got of my ported head before we bolted it on .
|
||
|
|
30-09-2005, 06:45 PM
|
#2 | ||
|
Guest
Posts: n/a
|
and heres some more
|
||
|
|
|
30-09-2005, 06:47 PM
|
#3 | ||
|
Guest
Posts: n/a
|
stuffed up wont lemme post any more attatchments
|
||
|
|
|
30-09-2005, 11:05 PM
|
#4 | ||
|
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
Some nice porting in the bowl area mate.The guides have also been shaped well too. As a rule of thumb that sort of work produces 15%more power.Forget the dyno this thing will haul well
 :
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again 
|
||
|
|
|
02-10-2005, 03:42 PM
|
#5 | ||
|
Barra Turbo > V8
  
Join Date: Jan 2005
Posts: 25,977
|
nice but gotta laugh at the title of this thread lol
__________________
-2011 XR6 Turbo Ute - Lux Pack - M6 -2022 Hyundai Tucson Highlander Diesel N Line |
||
|
|
|
03-10-2005, 09:30 AM
|
#6 | ||
|
TL40 Wagon?
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
|
Looks good. This is a mod i will do when the head needs to come off for a rebuild which will take quite a few more k's for me.
Who did the work? was it Gilberts? on the gold coast? Have you had it bench flow tested before and after or dynoed before and after? I wonder about porting the inlet with a BBM manifold would it mae any difference? Fixing the radius up in the port and unpocketing the valve sure but the actual port only need to match the BBM. |
||
|
|
|
|
03-10-2005, 04:39 PM
|
#7 | ||
|
Guest
Posts: n/a
|
head sense up here in brissy did the port job.
a mate of mine is going to have a play around with a manifold for us .apperently theres a couple of tricks you can do to them to pick the air speed up a bit . |
||
|
|
here's some head pics before fittin it
Linear Mode
